Read Sony DAV-TZ215 / DAV-TZ715 / HBD-TZ215 / HBD-TZ715 Service Manual online
HBD-TZ215/TZ715
9
2-5. FL BOARD, USB KEY BOARD, KZ-USB BOARD
7 connector
(CN2101)
qa connector
(CN5201)
6 Lift up two lead pins.
1 wire (flat type)
(11
core)
(CN5005)
2 screw
(BV3 (3-CR))
2 screw
(BV3 (3-CR))
8 screw
(BV3 (3-CR))
0 screw
(BV3 (3-CR))
9 guide (cord)
3 FL board
FL board
qs KZ-USB board
5 USB KEY board
4 three claws
$UUDQJLQJWKH86%ZLUH
:LUHIODWW\SHFRUHVHWWLQJ
Have the USB wire spread on the inside
of the claws of the chassis.
of the claws of the chassis.
USB wire
USB wire
heat sink
heat sink
CN3000
CN509
CN906
red
black
Tie up with LP3002.
Tie up with LP501.
Draw the USB wire through CN3000.
Keep a distance of more than 6.5 mm
between the wire and CN901.
between the wire and CN901.
Keep the wire tied up from lying on
the heat sink and the POWER board.
the heat sink and the POWER board.
Keep the wire tied up from lying on
the heat sink and the POWER board.
the heat sink and the POWER board.
POWER board
CN901
32 ± 1 mm
Click on the first or last page to see other DAV-TZ215 / DAV-TZ715 / HBD-TZ215 / HBD-TZ715 service manuals if exist.