DAV-SB100, DAV-SB200, HCD-SB100, HCD-SB200 - Sony Audio Service Manual (repair manual). Page 5

Read Sony DAV-SB100 / DAV-SB200 / HCD-SB100 / HCD-SB200 Service Manual online

5
HCD-SB100/SB200
SECTION 1
SERVICING NOTES
NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK
OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pick-
up block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
LASER DIODE AND FOCUS SEARCH OPERATION
CHECK
Carry out the “S curve check” in “CD section adjustment” and check
that the S curve waveform is output several times.
Ver. 1.5
Attention when IC101 (system controller) exchanged.
When IC101 (system controller) is exchanged, discharged C107.
The method of discharging C107, 4 pin and 5 pin of PN105 are
shorted only at the moment.
4
5
short 
Page of 82
Display

Click on the first or last page to see other DAV-SB100 / DAV-SB200 / HCD-SB100 / HCD-SB200 service manuals if exist.