Read Sony DAV-S400 / HCD-S400 Service Manual online
4
HCD-S400
HOW TO OPEN THE DISC TRAY WHEN POWER
SWITCH TURNS OFF
SWITCH TURNS OFF
When removing the disc tray, high torque is necessary to turn the
ejection cam on the bottom surface. Therefore, the screw thread is
easily damaged. To prevent this damage, turn it carefully.
ejection cam on the bottom surface. Therefore, the screw thread is
easily damaged. To prevent this damage, turn it carefully.
1
Turn the cam in the direction of the arrow.
2
Pull-out the disc tray.
Cam
Hole of chassis
• CLEANING THE OPTICAL PICK-UP
Note 1:
In cleaning the lens, do not apply an excessive force
As the optical pick-up is vulnerable, application of
excessive force could damage the lens holder.
excessive force could damage the lens holder.
Note 2:
In cleaning, do not use a cleaner other than exclusive
cleaning liquid. (KK-91 or isopropyl alcohol)
Note 3:
Wipe the obujective lens spirally from center toward
outside. (See Figure A)
(Figure A)
• DISC TRAY LOCK
The disc tray lock function for the antitheft of an demonstration
disc in the store is equipped.
disc in the store is equipped.
Setting Procedure :
1.
1.
Press the A button or the H button of the main unit or 1
button on the remote commander to turn the set on.
button on the remote commander to turn the set on.
2.
Press two buttons of DISPLAY and . PREV
simultaneously for two seconds.
simultaneously for two seconds.
3.
The message “LOCKED” is displayed and the tray is locked.
Releasing Procedure :
1.
1.
Press two buttons of DISPLAY and . PREV
simultaneously for two seconds again.
simultaneously for two seconds again.
2.
The message “UNLOCKED” is displayed and the tray is
unlocked.
unlocked.
Note : When “LOCKED” is displayed, the tray lock is not released
by turning power on/off with the POWER button.
• MOVEMENT CONFIRMATION BY THE REMOTE
CONTROLLER OF OTHER MODELS
CONTROLLER OF OTHER MODELS
Signal code of the attached remote controller may vary in the
generation of CD/DVD player.
The signal code of FUNCTION, BAND, ST/MONO and
MEMORY is different with the remote controller for DAV-S400
and the remote controller for DAV-S550/S880/C770/C990.
Be careful when you confirm by the remote controller of the different
model.
generation of CD/DVD player.
The signal code of FUNCTION, BAND, ST/MONO and
MEMORY is different with the remote controller for DAV-S400
and the remote controller for DAV-S550/S880/C770/C990.
Be careful when you confirm by the remote controller of the different
model.
Ver 1.4
NOTES ON DVD BOARD EXCHANGE
If a DVD board is exchanged, “DRIVE AUTO ADJUSTMENT’’
may be unable to be performed. In this case, initialize a memory in
the following procedure.
1.
may be unable to be performed. In this case, initialize a memory in
the following procedure.
1.
Starting Test Mode (See page 11).
2.
Press the 2 button of remote commander to set the Drive
Manual Operation (See page 16).
Manual Operation (See page 16).
3.
Press the 6 button of remote commander to set the Memory
Check (See page 18).
Check (See page 18).
4.
Press the [CLEAR] button of remote commander to initialize a
memory.
memory.
Click on the first or last page to see other DAV-S400 / HCD-S400 service manuals if exist.