DAV-S400, HCD-S400 - Sony Audio Service Manual (repair manual). Page 11

11

Procedure:
1.

Press the   A  button on the main unit or   1   button on the
remote commander to turn the set on.

2.

Press three buttons of  

FUNCTION 

,  .

 PREV

  and A

simultaneously for two seconds.

3.

The message “VER. 1. ** ” is displayed for a moment.

Procedure:
1.

Press the  A   button on the main unit or  1  button on the
remote commander to turn the set on.

2.

Press three buttons of  

BAND 

,  x  and  A  simultaneously.

3.

The fluorescent indicator displays “JOG 0”. The value “JOG
0” increases like +1, +2, +3... if rotating the VOLUME knob
clockwisw,or it decreases like –1, –2, –3,.... if rotating counter-
clockwise.

4.

To exit from this mode, press the  

POWER

  button to turn the

set off.

Procedure:
1.

Press the  A  button on the main unit or  1  button on the
remote commander to turn the set on.

2.

Press three buttons of  

DISPLAY 

,  x  and  A  simultaneously.

3.

The message “KEY NUM 0” is displayed and “0” blinks.

4.

Each time a button is pressed, “KEY NUM 0” value increases.
However, once a button is pressed, it is no longer taken into
account.

5.

When all buttons are pressed, “KEY NUM 11” appears and
the number blinking is stopped.

6.

To exit from this mode, press the  

POWER 

 button to turn the

set off.

Procedure:
1.

Press the  A  button on the main unit or  1  button on the
remote commander to turn the set on.

2.

Press three buttons of 

 BAND 

,  X  and  A  simultaneously.

3.

All segments are turned on.

4.

When the  

NEXT

 >  button is pressed, the display will light

up as follows.

5.

Press the  

NEXT

 >  button, confirm the display.

6.

Press the  

NEXT

 >  button, all segments are turned off.

7.

Every pressing of the  

NEXT

  >  button turns on each

segments in the same order.

8.

To exit from this mode, press the  

POWER

  button to turn the

set off.

Procedure:
1.

Press the  A  button on the main unit or  1  button on the
remote commander to turn the set on.

2.

Set the  

FUNCTION

  to DVD.

3.

While pressing two buttons of  

DISPLAY

  and

 x  simultaneously, turn the VOLUME knob clockwise.

4.

The Test Mode Menu is displayed on the TV screen.

5.

To execute each function, select the number on the remote
commander.

6.

See the following section for explanation in detail.

7.

To exit from this mode, press the  

POWER

  button to turn the

set off.

The Test Mode allows you to make diagnosis and adjustment easily
using the remote commander and monitor TV. The instructions,
diagnostic results, etc. are given on the on-screen display (OSD).

Set the FUNCTION to DVD with the main unit power on. Next,
while pushing the  x  button and the [DISPLAY] button on the main
unit at the same time, turn the VOLUME knob to the right to start
Test Mode and display the menu shown below on the TV screen. At
the bottom of the menu screen, the model name and revision number
are displayed.
To execute each function, select the desired menu and press its
number on the remote commander. To exit from Test Mode, press
the [POWER] button.

Test Mode Menu

0. Syscon Diagnosis

1. Drive Auto Adjustment

2. Drive Manual Operation

3. Mecha Aging

4. Emergency History

5. Version Information

6. Video Level Adjustment

                Exit: POWER Key

_

Model

: HCX-1030_xx

Revision : 1.xxx

ALL 1 DISCS  AUTO

TITLE

TRACK

CHAPTER

INDEX

HTUNED

M MONO

ST S

dB  REPEAT  1
kHz  PROGRAM
MHz  SHUFFLE

PRO  LOGIC

DIGITAL  FM  AM

NTSC  PBC  ANGLE

dts PCM

;

;

ALL 1 DISCS  AUTO

TITLE

TRACK

CHAPTER

INDEX

HTUNED

M MONO

ST S

dB  REPEAT  1
kHz  PROGRAM
MHz  SHUFFLE

PRO  LOGIC

DIGITAL  FM  AM

NTSC  PBC  ANGLE

dts PCM

;

;