Read Sony DAV-LF1H / SA-WSLF1H Service Manual online
4
SA-WSLF1H
SECTION 1
SERVICING NOTES
[The check method of the output signal from DIAT TRANSMITTER board]
Procedure:
1. A spectrum analyzer is connected to pin 2 and pin 1 of the output connector CN803 of DIAT TRANSMITTER board.
2. Confirm that it is spectrum as shown in a figure with the spectrum analyzer. It is normal if the signal of a 3MHz to 6MHz zone (a center
is 4.5MHz) can be checked.
digital
voltmeter
10
Ω
(0.5%)
DIAT TRANSMITTER
board
CN803 Pin 1
Pin 2
3. When the output signal from DIAT TRANSMITTER board is normal, pin 8 (SDATA), pin 4 (LRCKO) and pin 5 (BCKO) of the input
signal connector CN801 are investigated.
The units that are required for the system operation check during repair service
Unit
required for checking
required for checking
Unit to be
checked
DVD player:
HCD-LF1H
Subwoofer:
SA-WSLF1H
Front speaker:
SS-TSLF1H
Center speaker:
SS-CTLF1H
Surround speaker (L):
SA-TSLF1H
AC adaptor:
AC-LF1HR
Surround speaker (R):
SS-TSLF1HW
Remote commander:
RM-ADP011
HCD-LF1H
Subwoofer:
SA-WSLF1H
Front speaker:
SS-TSLF1H
Center speaker:
SS-CTLF1H
Surround speaker (L):
SA-TSLF1H
AC adaptor:
AC-LF1HR
Surround speaker (R):
SS-TSLF1HW
Remote commander:
RM-ADP011
DVD player:
HCD-LF1H
HCD-LF1H
Subwoofer:
SA-WSLF1H
SA-WSLF1H
Front speaker:
SS-TSLF1H
SS-TSLF1H
Center speaker:
SS-CTLF1H
SS-CTLF1H
Surround speaker
(L): SA-TSLF1H
(L): SA-TSLF1H
AC adaptor:
AC-LF1HR
AC-LF1HR
Surround speaker
(R): SS-TSLF1HW
(R): SS-TSLF1HW
*1 Only the defective unit.
Units with
Units with
a
mark: The units that are required for the system operation check during repair service.
(However, there can be a case that some units of the system need to not be brought into repair shop depending on the unit.that become defective.)
*1
Click on the first or last page to see other DAV-LF1H / SA-WSLF1H service manuals if exist.