Read Sony DAV-HDX265 / DAV-HDX266 / DAV-HDX267W / DAV-HDX465 / DAV-HDX466 / DAV-HDX665 / HCD-HDX265 / HCD-HDX266 / HCD-HDX267W / HCD-HDX465 / HCD-HDX466 / HCD-HDX665 Service Manual online
23
HCD-HDX265/HDX266/HDX267W/HDX465/HDX466/HDX665
SECTION 4
TEST MODE
Note:
Incorrect operations may be performed if the test mode is not entered
properly. In this case, press the
I
/1
button to turn the power off, and
retry to enter the test mode.
COLD RESET
The cold reset clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning the
set to the customers.
Procedure:
RAM to initial conditions. Execute this mode when returning the
set to the customers.
Procedure:
1. Press the
I
/1
button to turn the power on.
2. Press three buttons
x
,
A
and
I
/1
simultaneously.
3. When this button is operated, display as “COLD RESET” for
a while and all of the settings are reset.
PANEL TEST MODE
This mode is used to check the software version, FL, LED and KEY.
2-1. Display Test Mode
Procedure:
1. Press the
I
/1
button to turn the power on.
2. Press three buttons
X
,
.
and
A
simultaneously.
3. When the display test mode is activated, all segments are turned on.
4. To exit from this mode, press three buttons
4. To exit from this mode, press three buttons
X
,
.
and
A
simultaneously.
2-2. Version Test Mode
Procedure:
1. When the display test mode is activated, press the
.
button
and “DC2” (HDX265)/“DC2
−
” (HDX266)/“DC2W”
( H D X 2 6 7 W ) / “ D C 4 + ” ( H D X 4 6 5 / H D X 4 6 6 ) / “ D C 7 ”
(HDX665) is displayed, the version test mode is activated.
(HDX665) is displayed, the version test mode is activated.
2. Whenever the
.
button is pressed, the display changes in
order of “DC2” (model name)
t
“NA” (destination)
t
MC
t
SYS
t
UI
t
DVD
t
CDMA
t
CDMB
t
ST
t
TA
t
DSP
t
TM
t
CLA
t
CEC
t
“DC2” (model name).
Note:
Model name/destination is different according to model.
3. Press the
>
button and the date of the software production
is displayed.
4. Press the
>
button again and the version is displayed.
5. To exit from this mode, press three buttons
X
,
.
and
A
simultaneously.
2-3. Key Test Mode
Procedure:
1. When the display test mode is activated, press the
H
button,
to select the key test mode.
2. To enter the KEY test mode, the fluorescent indicator displays
“K0 V0”. Each time an another button is pressed, “KEY” value
increases. However, once a button is pressed, it is no longer
taken into account. When all keys are pressed correctly, “K13
V0” is displayed.
increases. However, once a button is pressed, it is no longer
taken into account. When all keys are pressed correctly, “K13
V0” is displayed.
3. When the [VOLUME] dial is turned in the direction of (+), “V0”
is changed to “V1”, then ... “V9”.
When the [VOLUME] dial is turned in the direction of (
−
), “V0”
is changed to “V9”, then ... “V1”.
4. To exit from this mode, press three buttons
X
,
.
and
A
simultaneously.
DISC TRAY LOCK
The disc tray lock function for the antitheft of an demonstration
disc in the store is equipped.
Setting Procedure :
disc in the store is equipped.
Setting Procedure :
1. Press the
I
/1
button to turn the set on.
2. Press the [FUNCTION] button to set DVD function.
3. Insert a disc.
4. Press the
3. Insert a disc.
4. Press the
x
button and the
A
button simultaneously for five
seconds.
5. The message “LOCKED” is displayed and the tray is locked.
Releasing Procedure :
1. Press the
x
button and the
A
button simultaneously for five
seconds again.
2. The message “UNLOCKED” is displayed and the tray is
unlocked.
Note:
When “LOCKED” is displayed, the tray lock is not released by
turning power on/off with the
turning power on/off with the
I/
1
button.
DVD SHIP MODE
Use this mode when returning the set to the customer after repair.
Procedure:
Procedure:
1. Press the
I
/1
button to turn the set on.
2. Press the [FUNCTION] button to set the function “DVD”.
3. Remove all discs, and then press two buttons
3. Remove all discs, and then press two buttons
H
and
I
/1
simultaneously.
4. After a message “MECHA LOCK” is displayed on the
fluorescent indicator tube, pull out the AC plug.
5. To exit from this mode, press the
I
/1
button to turn the set on.
AM STEP CHANGE
A step of AM channels can be changed over between 9 kHz and 10
kHz.
Procedure:
kHz.
Procedure:
1. Press the
I
/1
button to turn the set ON.
2. Press the [FUNCTION] button to set the function “TUNER
AM”.
3. Press the
I
/1
button to turn the set OFF.
4. Press two buttons
>
and
I
/1
simultaneously, and the display
of fluorescent indicator tube changes to “AM 9k STEP” or “AM
10k STEP”, and thus the channel step is changed over.
10k STEP”, and thus the channel step is changed over.
PRODUCT OUT
This mode moves the optical pick-up to the position durable to
vibration and clears all data including preset data stored in the RAM
to initial conditions. Use this mode when returning the set to the
customer after repair.
Procedure:
vibration and clears all data including preset data stored in the RAM
to initial conditions. Use this mode when returning the set to the
customer after repair.
Procedure:
1. Press the
I
/1
button to turn the power on.
2. Press the [FUNCTION] button to set the function “DVD”.
3. Remove all discs, and then press three buttons
3. Remove all discs, and then press three buttons
>
,
A
and
I
/1
simultaneously.
4. After the “STANDBY” blinking display finishes, the message
“MECHA LOCK” is displayed on the fluorescent indicator
tube disconnect the AC power plug, then the ship mode is set.
tube disconnect the AC power plug, then the ship mode is set.
AUTOMATIC ACOUSTIC FIELD CALIBRATION
MICROPHONE TEST MODE
MICROPHONE TEST MODE
Procedure:
1. Press the
I
/1
button to turn the power on.
2. Press the [FUNCTION] button to set the function other than
“DVD”.
3. Insert ECM-AC2 supplied as an accessory into the AUDIO
IN/A.CAL MIC jack.
4. While pressing the
X
and
A
buttons simultaneously, turn the
[VOLUME] dial in the direction of (+).
Click on the first or last page to see other DAV-HDX265 / DAV-HDX266 / DAV-HDX267W / DAV-HDX465 / DAV-HDX466 / DAV-HDX665 / HCD-HDX265 / HCD-HDX266 / HCD-HDX267W / HCD-HDX465 / HCD-HDX466 / HCD-HDX665 service manuals if exist.