Read Sony DAV-DZ910W / HBD-DZ910W Service Manual online
HBD-DZ910W
14
2-7. MAIN BOARD
MAIN board
0
CN2101 (5P)
ql
heat sink
6
CN1501 (6P)
4
CN512 (3P)
3
wire (flat type) (15 core)
(CN506)
9
wire (flat type) (9 core) (CN472)
7
wire (flat type) (19 core) (CN504)
8
wire (flat type) (24 core) (CN1101)
5
wire (flat type) (5 core)
(CN1502)
2
CN906 (11P)
1
CN904 (5P)
qa
two screws
(+BV3 (3-CR))
qf
screw
(+BV3 (3-CR))
qk
three screws
(+BV3 (3-CR))
qh
five screws
(+BV3 (3-CR))
qj
two screws
(+BV3 (3-CR))
w;
MAIN board
qs
insulated plate
(PC-DSZ)
qg
insulated plate
(PC-DSZ)
qd
shield plate (PC-DSZ)
Arranging the USB wire
USB wire
USB wire
Tie up with LP501.
Thread the USB wire through
the capacitors.
the capacitors.
The USB wire should be located on the front side
from these capacitors.
from these capacitors.
Dress the USB wire in this area
properly along the board.
properly along the board.
When the heat sink
has been removed,
apply oil compound
(G-747) to it.
has been removed,
apply oil compound
(G-747) to it.
EXCEPT CH, EA, SP
CH, EA, SP
• Abbreviation
CH
CH
: Chinese model
EA
: Saudi Arabia model
SP
: Singapore model
Click on the first or last page to see other DAV-DZ910W / HBD-DZ910W service manuals if exist.