Read Sony DAV-DZ555K / DAV-DZ556KB / DAV-DZ750K / HCD-DZ555K / HCD-DZ556KB / HCD-DZ750K Service Manual online
18
HCD-DZ555K/DZ556KB/DZ750K
3-11. POWER BOARD
3-10. IO-S-OUT BOARD
7
three screws
(+BVTP
(+BVTP
3
×
8)
8
screw
(+BV
(+BV
3
×
6)
9
IO-S-OUT board
4
wire (flat type) 21core (CN605) (EXCEPT MX, E32)
wire (flat type) 17core (CN607) (MX, E32)
5
wire (flat type)
5core (CN307)
5core (CN307)
6
connector
5p (CN302)
5p (CN302)
3
wire (flat type)
11core (CN304)
11core (CN304)
1
two screws
(+BV
(+BV
3
×
6)
2
bracket
(DIAT DS)
(DIAT DS)
1
connector
4p (CN3002)
4p (CN3002)
3
connector
12p (CN906)
12p (CN906)
4
connector
2p (CN907)
2p (CN907)
5
connector 2p (CN903)
2
connector
2p (CN901)
2p (CN901)
7
eight screws
(+PWH 3
(+PWH 3
×
8)
6
screw
(+BV 3
(+BV 3
×
6)
qa
POWER board
q;
cover (PWB)
9
Remove the two claws
in the direction of the
arrow
in the direction of the
arrow
B
.
8
Remove the POWER board
and the cover (PWB) in the
direction of the arrow
and the cover (PWB) in the
direction of the arrow
A
.
heatsink (AMP)
harness
screw
lead pin
Clamp the harnesses with a
lead pin or a similar tool so
that they do not touch this
screw and the heatsink (AMP).
lead pin or a similar tool so
that they do not touch this
screw and the heatsink (AMP).
Attach the heat radiation sheets
on the chassis, and then install
the POWER board.
on the chassis, and then install
the POWER board.
Attention at assembling
POWER board.
POWER board.
Because of prevention of
damage caused by creep of
radiation sheets, outfit a power
board with the set after fiting
the cover (PWB) on the POWER
board.
damage caused by creep of
radiation sheets, outfit a power
board with the set after fiting
the cover (PWB) on the POWER
board.
radiation sheets
A
B
•
Abbreviation
E32 : 110 – 240V AC area in E model
MX : Mexican model
E32 : 110 – 240V AC area in E model
MX : Mexican model
Click on the first or last page to see other DAV-DZ555K / DAV-DZ556KB / DAV-DZ750K / HCD-DZ555K / HCD-DZ556KB / HCD-DZ750K service manuals if exist.