Read Sony DAV-DZ280 / DAV-DZ680 / DAV-HDZ284 / DAV-HDZ485 / HCD-DZ280 / HCD-DZ680 / HCD-HDZ284 / HCD-HDZ485 Service Manual online
HCD-DZ280/DZ680/HDZ284/HDZ485
3
SAFETY CHECK-OUT
After correcting the original service problem, perform the follow-
ing safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs,
screws, and all other exposed metal parts for AC leakage.
Check leakage as described below.
After correcting the original service problem, perform the follow-
ing safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs,
screws, and all other exposed metal parts for AC leakage.
Check leakage as described below.
LEAKAGE TEST
The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microamperes.).
Leakage current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or RCA
The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microamperes.).
Leakage current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or RCA
WT-540A. Follow the manufacturers’ instructions to use these
instruments.
instruments.
2. A battery-operated AC milliammeter. The Data Precision 245
digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a
VOM or battery-operated AC voltmeter. The “limit” indication
is 0.75 V, so analog meters must have an accurate low-voltage
scale. The Simpson 250 and Sanwa SH-63Trd are examples
of a passive VOM that is suitable. Nearly all battery operated
digital multimeters that have a 2 V AC range are suitable. (See
Fig. A)
is 0.75 V, so analog meters must have an accurate low-voltage
scale. The Simpson 250 and Sanwa SH-63Trd are examples
of a passive VOM that is suitable. Nearly all battery operated
digital multimeters that have a 2 V AC range are suitable. (See
Fig. A)
1.5 k
Ω
0.15
μF
AC
voltmeter
(0.75 V)
To Exposed Metal
Parts on Set
Earth Ground
Fig. A. Using an AC voltmeter to check AC leakage.
Model
Part No.
DZ280: AEP, UK model
4-113-457-0[]
HDZ284: CND model
4-113-457-2[]
HDZ485: CND model
4-113-457-6[]
HDZ485: PX model
4-113-457-8[]
DZ680: AEP, UK model
4-113-459-5[]
MODEL IDENTIFICATION
– Back Panel –
– Back Panel –
Parts No.
• Abbreviation
CND : Canadian model
CND : Canadian model
Ver. 1.1
Click on the first or last page to see other DAV-DZ280 / DAV-DZ680 / DAV-HDZ284 / DAV-HDZ485 / HCD-DZ280 / HCD-DZ680 / HCD-HDZ284 / HCD-HDZ485 service manuals if exist.