Read Sony DAV-DS1000 / DVX-DS1000 Service Manual online
19
DVX-DS1000
SECTION 5
TEST MODE
[Version Display Mode]
* The software version is displayed.
Procedure:
1.
Procedure:
1.
Press three buttons of [VOLUME -], Z and x BAND (control
button) simultaneously for two seconds.
button) simultaneously for two seconds.
2.
The message “VER” is displayed. The version display mode is
activated.
activated.
3.
Press the HS (control button) button. “IF ***” is displayed.
4.
Each time the HS (control button) button is pressed, the
display changes in the order of AMP, TUN, DVD and ARA.
display changes in the order of AMP, TUN, DVD and ARA.
5.
To exit from this mode, press the ! button on the top panel of
the subwoofer.
the subwoofer.
[Key Test Mode]
* Button check
Procedure:
1.
Procedure:
1.
Press three buttons of > (control button), Z and
[VOLUME +] simultaneously.
[VOLUME +] simultaneously.
2.
The message “KEY T” is displayed.
3.
Each time a button is pressed, key value increases.
When all buttons are pressed, “8” is displayed.
When all buttons are pressed, “8” is displayed.
4.
To exit from this mode, press the ! button on the top panel of
the subwoofer.
the subwoofer.
[Display Test Mode]
Procedure:
1.
1.
Press three buttons of . (control button), Z and
[VOLUME -] simultaneously.
[VOLUME -] simultaneously.
2.
All segments of the liquid crystal display are turned on. Each
time the [VOLUME +] or [VOLUME -] button is pressed, the
pattern of segments changes.
time the [VOLUME +] or [VOLUME -] button is pressed, the
pattern of segments changes.
3.
To exit from this mode, press the ! button on the top panel of
the subwoofer.
the subwoofer.
[Disc Tray Lock]
The disc tray lock function for the antitheft of an demonstration
disc in the store is equipped.
Setting Procedure:
1.
disc in the store is equipped.
Setting Procedure:
1.
Turn the set on.
2.
Press two buttons of xBAND (control button) and Z
simultaneously for five seconds.
simultaneously for five seconds.
3.
The message “LOCKED” is displayed and the tray is locked.
Releasing Procedure:
1.
1.
Press two buttons of xBAND (control button) and Z
simultaneously for five seconds again.
simultaneously for five seconds again.
2.
The message “UNLOCK” is displayed and the tray is unlocked.
Note:
When “LOCKED” is displayed, the tray lock is not released
by turning power on/off with the ! button.
[CDM Ship Mode]
* This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
after repair.
Procedure:
1.
1.
Turn the set on.
2.
Set the function to DVD.
3.
Press the x BAND (control button) button for five seconds.
4.
The message “M.LOCK” is displayed.
5.
The CDM ship mode is set.
[AM Channel Step 9 kHz/10kHz Selection Mode]
* Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
Procedure:
1.
1.
Set the function to TUNER.
2.
Set the band to AM.
3.
Press the 1 button on the remote commander to set in the
standby mode.
standby mode.
4.
Press the 1 button on the remote commander while pressing
the x BAND (control button) button.
the x BAND (control button) button.
5.
The channel step is changed over.
Click on the first or last page to see other DAV-DS1000 / DVX-DS1000 service manuals if exist.