Read Sony DAR-RH1000 / DAR-RH7000 / HCD-RH1000 / HCD-RH7000 Service Manual online
16
HCD-RH1000/RH7000
SECTION 5
TEST MODE
COLD RESET
Procedure:
1. Connect a monitor to the LINE OUT jack (J801 on the AV-
089AU board).
2. Connect the subwoofer unit by attached system cord.
(*1)
3. Press the
I/
1
button to turn the power on.
4. Press the [SYSTEM MENU] key on the remote commander to
display menu screen.
5. Press the
X
/
x
key on the remote commander to select
“SETUP” and press the [ENTER] key on the remote
commander.
commander.
6. Press the
X
/
x
key on the remote commander to select
“Options” and press the
c
key on the remote commander.
7. Press the
X
/
x
key on the remote commander to select
“Factory Setup” and press the [ENTER] key on the remote
commander to the monitor display for selecting a group of
settings appears.
commander to the monitor display for selecting a group of
settings appears.
8. Press the
X
/
x
key on the remote commander to select
“ALL” and press the [ENTER] key on the remote commander.
9. To execute the cold reset, select the “Start” and press the
[ENTER] key on the remote commander.
*1) Subwoofer unit: SA-SWRH1 (for HCD-RH1000)
SA-SWRH10 (for HCD-RH7000)
If subwoofer is not connected, it does not execute the “Speaker” reset.
VERSION DISPLAY
Procedure:
1. Press the
I/
1
button to turn the power on.
2. P r e s s t h r e e bu t t o n s o f [REC STOP], [REC MODE] a n d
[VOLUME +] simultaneously to display the version on the
fluorescent indicator tube. Each time those three buttons are
pressed, it displays as follows.
fluorescent indicator tube. Each time those three buttons are
pressed, it displays as follows.
SYSCON version (RD-053AU board IC104)
r
ITCON version (AV-089AU board IC604)
r
STR version (IC1001 in the subwoofer unit)
(
*
2)
r
Back to the normal mode
*2) Subwoofer unit: SA-SWRH1 (for HCD-RH1000)
SA-SWRH10 (for HCD-RH7000)
If subwoofer is not connected, it displays “NOT IN USE”.
DVD FORCED RESET
Procedure:
1. In the standby or power on status, press down the
I/
1
button
for more than 10 seconds until “WELCOME” appears on the
fluorescent indicator tube.
fluorescent indicator tube.
2. Several seconds later, it returns to the standby mode.
HDD FORCED FORMAT
Note:
When this operation is executed, all contents recorded on the HDD
will be erased.
will be erased.
Procedure:
1. The message “HDD ERROR” is diplayed on the FL tube if
error occurred of the HDD as data discord. In this case, press
down the [HDD] button for more than 10 seconds until
“FORMAT” appears on the fluorescent indicator tube.
down the [HDD] button for more than 10 seconds until
“FORMAT” appears on the fluorescent indicator tube.
DISC TRAY LOCK MODE
This mode is used to unable to take sample disc out of tray in the
shop.
Procedure:
shop.
Procedure:
1. Press the
I/
1
button to turn the power on.
2. Press down two buttons of
x
and
A
for 5 seconds until
“TRAY LOCKED” appears on the fluorescent indicator tube.
3. To release this lock, press the two buttons of
x
and
A
for 5
seconds until “UNLOCKED” appears again.
FORCED EJECT
1. Insert the disc.
2. Disconnect the AC plug, then connect the AC plug while
2. Disconnect the AC plug, then connect the AC plug while
pressing down the
A
button, .and release the button when
the disc tray opens. (about 20 seconds)
3. Keep the
I/
1
button pressed for about 10 seconds until
“WELCOME” appears on the fluorescent indicator tube.
Note:
This operation can use while the disc tray lock is working.
Click on the first or last page to see other DAR-RH1000 / DAR-RH7000 / HCD-RH1000 / HCD-RH7000 service manuals if exist.