CX-JV10, JAX-V10 - Sony Audio Service Manual (repair manual). Page 8

8

Refer to the pages indicated in parentheses for details.

Use the remote.

1 Press CLOCK/TIMER/SET.

Go to step 3 when the time appears and the 'hour' flashes.

2 Press r or t repeatedly until "

CLOCK

SET " appears in the display and then press
ENTER.

3 Press r or t repeatedly to set the hour

and then press ENTER.

4 Press r or t repeatedly to set the minute

and then press ENTER.
The time display stops flashing and the clock starts from
00 seconds.

•MULTI JOG is also available in place of r or t.

To display the time
Press DISPLAY. The time will be displayed for 6 seconds.

Tip:
"

AM 12:00" indicates midnight and "PM 12:00" noon.

- -:- - " appears when the unit is turned off

There has been a power interruption. Reset the clock.

Buttons with the same or similar names as the main unit
basically have the same function.

1

2

CD: selects a CD track of the specified number.
Tuner: tunes in to the station with the specified preset
number.

The numbered buttons take on these functions below when pressed
with SHIFT held down

:

Enters AI Edit Recording or Programed Edit Recording
mode when pressed in stop mode.

Selects Tuner function and the radio band.

Switches between stereo or monaural FM reception.

Selects a Multiplex mode.

CD: selects Shuffle, Programmed playback, etc.

 Enters CD repeat playback mode.

Switches the sleep-timer on/off and selects the duration.

Selects BASS or TREBLE setting mode

Adjusts the echo level for CD function.

3 r

t

CD: selects a track.
Tuner: selects a preset station.
Tape: specifies tape length.
VCD: goes to the next/previous page or scene.
DIGEST: Activates the Digest playback function when
playback a VCD.
ZOOM: Enlarge VCD picture during pause.
BASS and TREBLE: adjusts the level.
Clock and Timer: sets the time.

4

-

+

7

&

MP3: selects a previous album or a succeeding album.
CD: adjust the playback sound key for CD function

5

Manually turns the PBC function on and off for a PBC
disc.

Marks a desired point when playing back a VCD.

Displays disc information such as the elapsed playback
time on the TV screen.

6

Enters timer setting mode.

Selects timer playback, timer recording or timer off.

7

8 SHIFT

Hold down when pressing a numbered button to change
its function to that printed above the number.
e.g.)
"Press SHIFT+BAND on the remote" indicates "Hold
down SHIFT and press '2' (BAND)". Doing so makes you
be able to select Tuner function and the radio band.

9 FUNCTION

Switches the active function among CD, TAPE, TUNER
and VIDEO (AUX or TV).

0 DISC SKIP

Select a disc.

! c/d

When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.

s

CD and Tape: stops playback.

f,g
CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.

a

CD and Tape: pauses playback.

@ SLOW

Plays back a VCD slowly while held down.

# VOLUME +, -

Adjusts the volume.

$ ENTER

CLEAR
Clears a track of the CD programed playback and a Radio
preset station.

The button not explained above (

SPECTRUM) does not

operate for this unit.