CX-JV10, JAX-V10 - Sony Audio Service Manual (repair manual). Page 7

Read Sony CX-JV10 / JAX-V10 Service Manual online

7
CX-JV10
Main unit: front
Refer to the pages indicated in parentheses for details.
SECTION  2
GENERAL
LOCATION  OF  CONTROLS
This section is extracted from
instruction manual.
% cPLAY/PRESET
When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.
Tuner: tunes into a preset station.
sSTOP/CLEAR/vRETURN
CD and Tape: stops playback.
Tuner: clears a station preset.
TUNING DOWN, TUNING UP
CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
aPAUSE/SET
CD and Tape: pauses playback.
Tuner: stores the received station in to preset.
BASS
Emphasizes low frequency sound.
i-Bass
Produces rich and clear low frequency sound.
DISPLAY
Displays the time and the remaining time for CD.
ALBUM -+
Selects a previous album or a succeeding album with
MP3-CDs.
SYNC DUB
Starts dubbing a whole tape.
wREC/REC MUTING
Starts recording.
DISC DIRECT PLAY 1-3
Selects a disc.
0 zOPEN/CLOSE
Opens or closes the disc compartment.
TAPE A/B
Selects Tape function, and deck A or B.
TUNER/BAND
Selects Tuner function and the radio band.
VIDEO/AUX
Selects the function of external equipment connected to
VIDEO/AUX jacks.
CD
Selects CD function.
Remote sensor
Receives a signal from the remote.
VOLUME
Adjusts the volume.
TREBLE
Enhances high frequency sound.
MULTI JOG
When used in combination with ENTER and MULTI JOG,
CD: selects a track and Repeat/Shuffle/Programed
playback.
Tuner: selects a preset station.
Clock and Timer: sets the time.
ECO and Dimmer: selects the mode.
MIC MIXING
Adjusts the microphone volume.
MIC jack
Connects the microphone here.
PHONES jack
Plug in here an optional headphones set with a mini
stereo plug (ø3.5 mm). Speaker output is canceled.
DISC CHANGE
Rotates the CD trays.
POWER 6STANDBY/ON
Switches the unit on and off (standby).
The red indicator flashes when receiving a signal from
the remote.
MODE
Selects various modes (ECO and Repeat/Shuffle/
Programed playback, etc.) when used in combination with
ENTER and MULTI JOG.
ENTER
Fixes the modes and the time (ECO, Repeat/Shuffle/
Programed playback, clock, and timer, etc.) when used
in combination with ENTER and MULTI JOG.
Main unit: rear
Refer to the pages indicated in parentheses for details.
NTSC/AUTO/PAL switch
Sets the color system of the video signal output via the
VIDEO OUT jack. Turn off the power, and then set the
switch according to your TV set;
- PAL: When connecting to a PAL system TV.
- NTSC: When connecting to a NTSC system TV.
- AUTO: When connecting to a multi color system TV.
• In case of setting the switch to "
AUTO", you need to
adjust the color system according to your VCD to play
back. Hold down CD button for about 6 seconds in stop
mode in CD function, and "
PAL " (initial) or "NTSC"
appears on the display (except when the loaded disc is
MP3-CD).
When playing back a PAL VCD, hold down CD and
release it when "
PAL " appears.
When playing back a NTSC VCD, do the same procedure
and release it when "
NTSC" appears.
When the function is changed or the unit is turned off,
PAL is resorted.
• This unit does not support color systems other than
PAL and NTSC, such as NTSC 4.43 or SECAM.
• If there is a color or picture trouble in the AUTO mode,
select NTSC or PAL.
AM LOOP,
FM 75
Ω terminals
Plug in the supplied AM and FM antennas here.
VIDEO/AUX jacks
Accepts analog sound signals from external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, press VIDEO/AUX.
Tip:
To change the displayed name for this function, turn the
unit on, then hold down VIDEO/AUX and press POWER
on the unit. Repeat the procedure to select "
VIDEO
",
"
AUX
" or "
TV
".
REC OUT jacks
Outputs analog sound signals to external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
When the function is set to "
VIDEO
", "
AUX
" or "
TV
",
no signal is output from the REC OUT jacks.
4 # SPEAKER terminals
Connect the speaker cord of the supplied front speakers
here.
VIDEO OUT jack
Outputs video signals. Connect to the video input jack
of your TV set with the supplied video connecting cord.
Select the appropriate video input on your TV. Refer to
the operating instructions of your TV.
(except Saudi Arabia model)
AC voltage selector
Switches AC voltage according to your local voltage.
Make sure it matches your local voltage.
AC power cord
Page of 87
Display

Click on the first or last page to see other CX-JV10 / JAX-V10 service manuals if exist.