CX-JTV8, JAX-TV8 - Sony Audio Service Manual (repair manual). Page 7

7

This section is extracted from
instruction manual.

1 DISC CHANGE/DISC SKIP

Rotates the CD trays.

2 POWER  6STANDBY/ON

Switches the unit on and off (standby).
The red indicator flashes when receiving a signal from
the remote.

3 TAPE A/B 

Selects Tape function, and deck A or B.

Selects Tuner function and the radio band.

Selects the function of external equipment connected to
MD (VIDEO) jacks.

Selects CD function.

4 TREBLE/MIDDLE

Enhances high or middle frequency sound.

5 CD SYNC

Starts Automatic CD dubbing.

Starts recording.

6 PHONES jack

Plug in here an optional headphones set with a mini
stereo plug (ø3.5 mm). Speaker output is canceled.

Connects the microphone here.

Adjusts the microphone volume.

Refer to the pages indicated in parentheses for details.

7 DISC DIRECT PLAY 1-3

Selects a disc.

8 zOPEN/CLOSE

Opens or closes the disc compartment.

9 HEAVY, VOCAL,  SALSA, TECHNO,

Activates a graphic equalization curve.

0 MODE

Selects various modes (Play mode and Tape reverse, etc.)
when used in combination with ENTER and MULTI JOG.

Fixes the modes and the time (Play mode and Tape
reverse, etc.) when used in combination with MODE and
MULTI JOG.

! MULTI JOG

CD: skips to a previous or a succeeding track.
Tuner: selects a preset station.
Clock and Timer: sets the time.
Selects the mode and the time when used in combination
with MODE and ENTER.

@ VOLUME

Adjusts the volume.

# BASS

Adjusts low frequency sound.

Switches surround on and off.

Produces rich and clear low frequency sound.

$ DISPLAY

Displays the time and the remaining time for CD.
When the unit is off, press DISPLAY to switch between
DEMO, Clock and ECO display modes.

ALBUM -, + 

Selects a previous album or a succeeding album with
MP3-CDs.

% TUNING DOWN, TUNING UP (f , g)

CD: searches a track in fast forward or fast reverse
playback.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.

a

CD and Tapes: pauses playback.

d

CD and Tapes: starts playback.

s

CD and Tapes: stops playback.

Refer to the pages indicated in parentheses for details.

1 AM LOOP,   FM 75 Ω terminals

Plug in the supplied AM and FM antennas here.

2 MD (VIDEO) IN jacks

Accepts analog sound signals from external equipment.
Connect using an optional connecting cord with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, press MD (VIDEO).

To change the displayed name for this function, turn the
unit on, then hold down MD (VIDEO) and press POWER
on the unit. Repeat the procedure to select “MD” or
“VIDEO”.

3 MD (VIDEO) OUT jacks

Outputs the  analog sound signals of CD, TAPE, and
TUNER to external audio equipment.
Connect using an optional connecting cord with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.

4 SURROUND SPEAKER terminals

Connect for each speaker the blue cord to the 0 terminal
and the black cord to the 9 terminal.

Connect for each speaker the red cord to the 0 terminal
and the black cord to the 9 terminal.

5 AC power cord
6 VIDEO OUT jack

Outputs video signals. Connect to the video input jack
of your TV set with the supplied video cord.
Select the appropriate video input on your TV. Refer to
the operating instructions of your TV.

7 AC VOLTAGE selector

Switches AC voltage according to your local voltage.
Make sure it matches your local voltage.