CX-JN5, JAX-N5, JAX-PK5 - Sony Audio Service Manual (repair manual). Page 7

7

This section is extracted from
instruction manual.

1

Rotates the CD trays.

2

6

Switches the unit on and off (standby).
The red indicator flashes when receiving a signal from
the remote.

3

Selects various  modes (ECO and  Repeat/Shuffle/
Programmed playback, etc.) when used in combination
with ENTER  and MULTI JOG.

4

Fixes the modes and the time (ECO, Repeat/Shuffle/
Programmed playback, clock, and timer, etc.) when used
in combination with ENTER and MULTI JOG.

#

Enhances high frequency  sound.

$ d

When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.
Tuner: tunes into  a preset  station.
s

CD and Tape: stops  playback.
Tuner: clears  a station  preset.
f

g

CD: searches a  track  in fast  forward or fast reverse
playback when  held down.
Tape: fast 

or rewinds  the tape.

Tuner: manually  tunes down or up within  the band.
a

CD and 

Tape: pauses  playback.

Tuner: stores the received  station into preset.

%

Emphasizes low frequency sound.

^

Produces rich and clear low  frequency sound.

&

Displays the time and the remaining  time  for CD.

k

i

Selects a previous  album or a succeeding album 
MP3-CDs.

5

When used in combination  with ENTER and  MULTI JOG,
CD: selects a  track  and  Repeat/Shuffle/Programmed
playback.
Tuner: selects a preset  station.
Tape: selects a reverse  mode  and specifies  tape length.
Clock and Timer:  sets  the time.
i-Bass: selects  a  frequency  range.
Spectrum analyzer, ECO and Dimmer: selects the mode.

6

Plug in here  an optional  headphones  set  with  a  mini
stereo plug  (ø3.5 mm).  Speaker  output is canceled.

7

Starts dubbing a whole tape.
w

Starts recording.

8

Selects a disc.

9 z

Opens or closes the disc compartment.

0

Selects Tape function, and deck A or B.

Selects Tuner  function  and  the radio  band.

Selects the function of external equipment connected to
VIDEO/AUX jacks.

Selects CD function.

!

Receives a signal from the remote.

@

Adjusts the volume.

forward

1

Ω

Plug in the supplied AM and FM antennas here.

2

Accepts analog sound signals from external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, press VIDEO/AUX.

Tip:
To change the displayed name for this function, turn the
unit on, then hold down VIDEO/AUX and press POWER
on the unit. Repeat the procedure to select "

VIDEO

",

"

AUX

" or "

TV

".

3 #

Connect the speaker cord of the supplied front speakers
here.

4

Switches AC voltage between 110 - 120V and 220 - 240V.
Make sure it matches your local voltage.

5