CX-JN3, JAX-N3, JAX-PK3 - Sony Audio Service Manual (repair manual). Page 7

7

This section is extracted from
instruction manual.

1

Rotates the CD trays.

2

6

Switches the unit on and off (standby).
The red indicator  flashes  when  receiving a signal from
the remote.

3

Selects various  modes (ECO and Repeat/Shuffle/
Programed playback,  etc.)  when  used in combination with
ENTER and MULTI JOG.

4

Fixes the modes and the time (ECO, Repeat/Shuffle/
Programed playback, clock, and timer , etc.) when used
in combination with ENTER and  MULTI JOG.

!

Receives a signal from the remote.

@

Adjusts the  volume.

#

Enhances high frequency sound.

$

Emphasizes low  frequency  sound.

%

Produces rich and  clear low frequency sound.

^

c

When the unit is turned off: activates or deactivates
DEMO.
CD and Tape:  starts  playback.
Tuner: tunes into a preset station.

s

CD and Tape:  stops  playback.
Tuner: clears  a station  preset.

f

g

CD: searches a  track  in  fast foward or  fast  reverse
playback when held down.
Tape: fast forwards or rewinds  the  tape.
Tuner: manually tunes down or up within the band.

a

CD and Tape: pauses playback.
Tuner: stores  the received  station  in  to preset.

5

When used in combination  with ENTER  and MULTI JOG,
CD: selects a  track  and Repeat/Shuffle/Programed
playback.
Tuner: selects a preset  station.
Tape: specifies tape length.
Clock and T imer:  sets  the time.
i-Bass: selects  a frequency  range.
Spectrum analyzer , ECO and Dimmer: selects  the mode.

6

Plug in here  an optional  headphones  set  with  a  mini
stereo plug (ø3.5 mm). Speaker output is canceled.

7

Starts dubbing a whole  tape.

w

Starts recording.

8

Selects a disc.

9

z

Opens or closes the disc compartment.

0

Selects Tape function,  and  deck  A or B.

Selects Tuner function and the radio band.

Selects the function of external equipment connected to
VIDEO/AUX jacks.

Selects CD function.

1

Ω

Plug in the supplied AM and FM antennas here.

2

Accepts analog sound signals  from external equipment.
Connect using  an optional connecting cable with RCA
phono plugs  (red plug to R jack,  white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch  function  to external input,  press VIDEO/AUX.

Tip:
To change the displayed name for this function, turn the

 

unit on, then hold down VIDEO/AUX and press POWER
on the unit. Repeat the procedure  to select 

“VIDEO”

,

“AUX” 

or 

“TV” 

.

3

#

Connect the speaker cord of the supplied front speakers
here.

4