Read Sony CX-JN20 / CX-JN30 / JAX-N20 / JAX-N30 Service Manual online
7
CX-JN20/JN30
SECTION 2
GENERAL
This section is extracted from
instruction manual.
instruction manual.
• LOCATION OF CONTROLS
1 DISC CHANGE
Rotates the CD trays.
2 POWER 6STANDBY/ON
Switches the unit on and off (standby).
The red indicator flashes when receiving a signal from
the remote.
The red indicator flashes when receiving a signal from
the remote.
3 MODE
Selects various modes (ECO and Repeat/Shuffle/
Programmed playback, etc.) when used in combination
with ENTER and MULTI JOG.
Programmed playback, etc.) when used in combination
with ENTER and MULTI JOG.
4 ENTER
Fixes the modes and the time (ECO, Repeat/Shuffle/
Programmed playback, clock, and timer, etc.) when used
in combination with ENTER and MULTI JOG.
Programmed playback, clock, and timer, etc.) when used
in combination with ENTER and MULTI JOG.
# TREBLE
Enhances high frequency sound.
$ cPLAY/PRESET
When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.
Tuner: tunes into a preset station.
sSTOP/CLEAR
CD and Tape: stops playback.
Tuner: clears a station preset.
f TUNING DOWN, gTUNING UP
CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
aPAUSE/SET
CD and Tape: pauses playback.
Tuner: stores the received station in to preset.
DEMO.
CD and Tape: starts playback.
Tuner: tunes into a preset station.
sSTOP/CLEAR
CD and Tape: stops playback.
Tuner: clears a station preset.
f TUNING DOWN, gTUNING UP
CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
aPAUSE/SET
CD and Tape: pauses playback.
Tuner: stores the received station in to preset.
% BASS
Emphasizes low frequency sound.
^ i-Bass
Produces rich and clear low frequency sound.
& DISPLAY
Displays the time and the remaining time for CD.
ALBUM k, i
Selects a previous album or a succeeding album with
MP3-CDs.
PTY (CX-JN20/JN30: AEP, UK)
Displays a program type for RDS (Radio Data System)
ALBUM k, i
Selects a previous album or a succeeding album with
MP3-CDs.
PTY (CX-JN20/JN30: AEP, UK)
Displays a program type for RDS (Radio Data System)
Main unit: front
Refer to the pages indicated in parentheses for details.
5 MULTI JOG
When used in combination with ENTER and MULTI JOG,
CD: selects a track and Repeat/Shuffle/Programmed
playback.
Tuner: selects a preset station.
Tape: specifies tape length.
Clock and Timer: sets the time.
i-Bass: selects a frequency range.
Spectrum analyzer, ECO and Dimmer: selects the mode.
CD: selects a track and Repeat/Shuffle/Programmed
playback.
Tuner: selects a preset station.
Tape: specifies tape length.
Clock and Timer: sets the time.
i-Bass: selects a frequency range.
Spectrum analyzer, ECO and Dimmer: selects the mode.
6 PHONES jack
Plug in here an optional headphones set with a mini
stereo plug (ø3.5 mm). Speaker output is canceled.
stereo plug (ø3.5 mm). Speaker output is canceled.
7 SYNC DUB
Starts dubbing a whole tape.
wREC/REC MUTING
Starts recording.
wREC/REC MUTING
Starts recording.
8 DISC DIRECT PLAY 1-3
Selects a disc.
9 zOPEN/CLOSE
Opens or closes the disc compartment.
0 TAPE A/B
Selects Tape function, and deck A or B.
TUNER/BAND
Selects Tuner function and the radio band.
VIDEO/AUX
Selects the function of external equipment connected to
VIDEO/AUX jacks.
CD
Selects CD function.
TUNER/BAND
Selects Tuner function and the radio band.
VIDEO/AUX
Selects the function of external equipment connected to
VIDEO/AUX jacks.
CD
Selects CD function.
! Remote sensor
Receives a signal from the remote.
@ VOLUME
Adjusts the volume.
Main unit: rear
Refer to the pages indicated in parentheses for details.
1
AM LOOP, FM 75
Ω
terminals
Plug in the supplied AM and FM antennas here.
2
VIDEO/AUX jacks
Accepts analog sound signals from external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, press VIDEO/AUX.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, press VIDEO/AUX.
Tip:
To change the displayed name for this function, turn the
unit on, then hold down VIDEO/AUX and press POWER
on the unit. Repeat the procedure to select "VIDEO",
"AUX" or "TV".
To change the displayed name for this function, turn the
unit on, then hold down VIDEO/AUX and press POWER
on the unit. Repeat the procedure to select "VIDEO",
"AUX" or "TV".
3 #
SPEAKER terminals
Connect the speaker cord of the supplied front speakers
here.
here.
4
AC power cord
Click on the first or last page to see other CX-JN20 / CX-JN30 / JAX-N20 / JAX-N30 service manuals if exist.