Read Sony CX-JN101 / JAX-N101 Service Manual online
17
CX-JN101
SECTION 4
TEST MODE
MC COLD RESET
•
The cold reset clears all data including preset data stored in
the RAM to initial conditions. Execute this mode when
returning the set to the customer.
returning the set to the customer.
Procedure:
1. In the standby status, while pressing the
x
button, press the
[POWER] button.
2. The set is reset, then becomes standby status.
GC TEST MODE
Procedure:
1. Press the [POWER] button to turn the power on.
2. While pressing the
2. While pressing the
x
button, press the [POWER] button for
5 seconds.
3. It change displays in order of model type, version and suffix
at 2 seconds interval, then the display is back to normal status.
AMP TEST MODE
Procedure:
1. In the status where AC plug is disconnected, while pressing
the [VIDEO/AUX] button, connect the AC plug to turn the power
on. Then enter the AMP test mode and display “AMP TEST”.
on. Then enter the AMP test mode and display “AMP TEST”.
2. If turn the [VOLUME] knob clockwise, it displays “VOLUME
MAX”, and if turn the knob counterclockwise, it displays
“VOLUME 0”.
“VOLUME 0”.
3. If the [TREBLE] and [BASS] knobs are turned clockwise or
counterclockwise, it change displays in order of “EQ MAX”,
“EQ MIN” and “EQ FLAT”.
“EQ MIN” and “EQ FLAT”.
4. To release from this mode, disconnect the AC plug and turn
the power off.
DISC TRAY LOCK
Procedure:
1. Press the [POWER] button to turn the power on.
2. While pressing the
2. While pressing the
x
button, press the
OPEN/CLOSE
Z
button for 5 seconds.
3. The message “LOCKED” is displayed and the tray is locked.
(Even if exiting from this mode, the tray is still locked)
4. To release this lock, while pressing the
x
button, press
the
OPEN/CLOSE
Z
button for 5 again.
5. The message “UNLOCKED” is displayed and the tray is un-
locked.
CD REPEAT 5 LIMIT CANCEL MODE
•
Number of repeat for CD playback is 5 times when the repeat
mode is “REPEAT”. This mode enables CD to repeat playback
for limitless times.
for limitless times.
Procedure:
1. Press the [POWER] button to turn the power on.
2. In the repeat on status, while pressing the
2. In the repeat on status, while pressing the
x
button, press
the [CD] button to enter the CD repeat 5 limit cancel mode
and repeat mark blinks on the fluorescent indicator tube.
and repeat mark blinks on the fluorescent indicator tube.
3. To release this mode, press the [POWER] button to turn the
power off.
CHANGE-OVER OF AM TUNER STEP BETWEEN
9 kHz AND 10 kHz
9 kHz AND 10 kHz
•
A step of AM channels can be changed over between 9 kHz
and 10 kHz.
Procedure:
1. Press the [POWER] button to turn the power on.
2. While pressing the [TUNER] button, press the [POWER] button
2. While pressing the [TUNER] button, press the [POWER] button
to the display on fluorescent indicator tube changes to “AM
530 kHz” (10 kHz step) or “AM 531 kHz” (9 kHz step), and
thus the channel step is changed over.
530 kHz” (10 kHz step) or “AM 531 kHz” (9 kHz step), and
thus the channel step is changed over.
FUNCTION CHANGE MODE
•
Select either TV, VIDEO or AUX (MD) of the external function
input.
Procedure:
1. Press the [POWER] button to turn the power on.
2. While pressing the [VIDEO/AUX] button, press the [POWER]
2. While pressing the [VIDEO/AUX] button, press the [POWER]
button.
3. Each time this operation is operated, it change displays in order
of “TV”, “VIDEO” and “AUX”.
Click on the first or last page to see other CX-JN101 / JAX-N101 service manuals if exist.