CX-JN1, JAX-N1, JAX-PK1 - Sony Audio Service Manual (repair manual). Page 8

8

Buttons with the same or similar names with the main unit
basically have the same function.

1

2

CD: selects a CD track of the specified number.
Tuner: tunes in to the station with the specified preset
number.

The numbered buttons take on these functions below when pressed
with SHIFT held down:

Enters AI Edit Recording or Programmed Edit Recording
mode when pressed in stop mode.

Selects Tuner function and the radio band.

Switches between stereo or monaural FM reception.

3 r

t

CD: selects a track.
Tuner: selects a preset station.
Tape: specifies tape length.
BASS and TREBLE: adjusts the level.
Clock and Timer: sets the time.

4

Selects Shuffle or Programmed playback in CD function.

 Enters CD repeat playback mode.

5

Enters timer setting mode.

Selects timer playback, timer recording or timer off.

6

Displays the time and the remaining time for CD.

7

Hold down when pressing a numbered button to change
its function to that printed above the number.
e.g.)
"Press SHIFT+BAND on the remote" indicates "Hold
down SHIFT and press '2' (BAND)". Doing so makes you
be able to select Tuner function and the radio band.

8

Switches the active function among CD, TAPE, TUNER
and VIDEO (AUX or TV).

9

Select a disc.

0 c

d

When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.

s

CD and Tape: stops playback.

f

g

CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.

a

CD and Tape: pauses playback.

!

Switches the sleep-timer on/off and selects the duration.

@

+

-

Adjusts the volume.

#

Selects BASS or TREBLE setting mode

Clears a track of the CD programmed playback and a
Radio preset station.

The 

The button not explained above (

) does not

operate for AEP, UK and CIS models.

buttons not explained above (

  N,  M

and 

) do not operate for this unit.

 

Selects a Multiplex mode.

Use the remote.

1 Press CLOCK/TIMER/SET.

Go to step 3 when the time appears and the 'hour' flashes.

2 Press  r  or  t  repeatedly until "

CLOCK

SET

" appears in the display and then press

ENTER.

3 Press r or t repeatedly to set the hour

and then press ENTER.

4 Press r or t repeatedly to set the minute

and then press ENTER.
The time display stops flashing and the clock starts from
00 seconds.

•MULTI JOG is also available in place of r or t.

To display the time
Press DISPLAY on the remote. The time will be displayed for
6 seconds.

- -:- -

There has been a power interruption. Re-set the clock.