Read Sony CMT-X5CD / CMT-X5CDB / CMT-X7CD / CMT-X7CDB Service Manual online
CMT-X5CD/X5CDB/X7CD/X7CDB
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2014.02
New
1.1
2014.04
Addition of Russian model (CMT-X5CD)
Addition of Australian model (CMT-X5CDB)
Addition of Chinese model (CMT-X7CD)
Deletion of Part for Ref. No. C030 to C033 and C508 to C512 on the MAIN board
Addition of SHEET (EMC-ABSOBER) on the MAIN board and JACK-NET board
Addition of FOOT (S) on the module (DAB tuner)
Change of Wire setting (“2-6. BLUETOOTH MODULE BLOCK, MAIN CHASSIS BLOCK-3”,
“2-13. JACK BOARD BLOCK (X5CD/X5CDB)” and “2-14. JACK-NET BOARD BLOCK-1
(X7CD/X7CDB)” on DISASSEMBLY)
Deletion of CUSHION (C) (3 pieces) and Addition of BCO CUSHION (2 pieces), PWB CUSHION
(JACK) and FFC CUSHION (USB) (3 pieces: X5CD/X5CDB, 4 pieces: X7CD/X7CDB)
(SMR-13061)
1.2
2014.06
Addition of Singapore and Korean models (CMT-X5CD)
Deletion of Black color type (AEP model (CMT-X7CD/X7CDB))
Change of Part No. for INSTRUCTION MANUAL and Quick Start Guide
(SMR-14010)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.