CMT-VP11, HCD-VP11 - Sony Audio Service Manual (repair manual). Page 2

Read Sony CMT-VP11 / HCD-VP11 Service Manual online

2
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
Tape player section
Recording system
4-track 2-channel stereo
Frequency response (DOLBY NR OFF)
50 - 13,000 Hz (
±
3 dB), using a
Sony TYPE I cassette
50 - 14,000 Hz (
±
3 dB),
using a Sony TYPE II cassette
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
87.5 - 108.0 MHz
(50-kHz step)
Antenna
FM wire antenna
Antenna terminals
75 
 unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Middle Eastern model:
531 - 1,602 kHz
(with the tuning interval set at
9 kHz)
Other models:
530 - 1,710 kHz
(with the tuning interval set at
10 kHz)
531 - 1,602 kHz
(with the tuning interval set at
9 kHz)
Antenna
AM loop antenna, external antenna
terminal
Intermediate frequency
450 kHz
General
Power requirements
220 - 240 V AC , 50/60 Hz
Adjustable with voltage selector
Power consumption
75 W
Dimensions (w/h/d)
Approx. 190 
×
 252 
×
 310 mm
incl. projecting parts and controls
Mass
Approx. 5.7 kg
Supplied accessories
Remote commander (1)
AM loop antenna (1)
FM wire antenna (1)
Batteries (2)
Video connecting cord (1)
Design and specifications are subject to change
without notice.
Page of 38
Display

Click on the first or last page to see other CMT-VP11 / HCD-VP11 service manuals if exist.