Read Sony CMT-VB5 / HCD-VB5 Service Manual online
4
This section is extracted
from instruction manual.
from instruction manual.
Step 2: Setting the time
You must set the time beforehand to use the timer
functions.
functions.
H
X
O
x
>
.
M
m
`/1
DISPLAY
3,5
m
2
4,6
4
1
1
Turn on the system.
2
Press CLOCK/TIMER SET.
The clock appears and the hour indication
flashes.
flashes.
2
1
: 0 0
A M
3
Press ./> to set the hour.
4
Press ENTER or M.
The minute indication flashes.
1 1 : 0 0
A M
5
Press ./> to set the minute.
6
Press ENTER.
The clock starts.
If you made a mistake
Press m/M repeatedly until the incorrect item
flashes, then set it again.
flashes, then set it again.
To change the preset time
You can change the preset time while the system
is off.
is off.
1 Press DISPLAY to display the clock.
2 Press CLOCK/TIMER SET.
3 Repeat steps 3 to 6 of “Setting the time.”
2 Press CLOCK/TIMER SET.
3 Repeat steps 3 to 6 of “Setting the time.”
Tips
• The upper dot of the colon flashes for the first 30
seconds, and the lower dot flashes for the last 30
seconds of each minute.
seconds of each minute.
• Each time you press DISPLAY while the system is
off, the display switches between no display and the
clock display.
clock display.
Click on the first or last page to see other CMT-VB5 / HCD-VB5 service manuals if exist.