Read Sony CMT-V50IP (serv.man3) Service Manual online
CMT-V50iP
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2012.04
New
1.1
2012.07
Addition of TROUBLESHOOTING (SUPPLEMENT-1)
(SMR-12017)
1.2
2012.08
Addition of Russian and Korean models
Change of Part for Ref. No. IC504, IC506, R972 and R973 on the MAIN board
Deletion of Part for Ref. No. Q913 on the MAIN board and Addition of Part for Ref. No. Q902 on the
MAIN board
Deletion of Part for Ref. No. C1001, D1001, Q1001, R1002 and R1004 to R1006 on the JACK board
(Addition of NOTE)
Change of Part for Ref. No. J1001 on the JACK board
Deletion of Part for Ref. No. Q1009, Q1010 on the JACK board and Addition of Part for Ref. No. Q1004,
Q1005 on the JACK board
(SMR-12030)
1.3
2013.05
Change of FUNC LED, IP JUNC, KEY, POWER KEY, RMC and SHORTLAND boards (Suffi x-12)
Change of Part No. for Ref. No. CN1501 on the IP DOCK board
Change of Part No. for AC ADAPTOR (AC-E1939D)
Change of Part No. for POWER-SUPPLY CORD SET (Korean model)
Change of JACK, LCD, MAIN and USB boards (Suffi x-12) (SUPPLEMENT-2)
(SMR-12068/13009)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.