Read Sony CMT-SD1 / CMT-SD3 / HCD-SD1 Service Manual online
– 6 –
POSITION FOR SERVICING THE CD MECHANISM
DECK
DECK
1 Remove the four screws securing the upper cover, and remove
the upper cover.
2 Remove the loading panel. (Refer to SECTION 3 DISASSEM-
BLY.)
3 Remove the four screws A securing the MAIN board, five screws
B of the rear panel, and flat cables (CN701, CN702), and re-
move the MAIN board.
move the MAIN board.
4 Remove the two screws D securing the SUB-TRANS board,
and remove the SUB-TRANS board.
5 Remove the two screws F securing the REG board.
6 Remove the three screws G securing the CDM cover, and re-
6 Remove the three screws G securing the CDM cover, and re-
move the CDM cover.
7 Remove the two screws H securing the CDM, move the CDM
backwards by about 5 mm horizontally, and then lift upwards.
8 Rotate the CDM in the counterclockwise direction by about 30˚
to remove.
9 Return the MAIN and SUB-TRANS boards to their original
positions.
G
H
CDM cover
A
A
B
B
D
F
SUB-TRANS board
MAIN board
Flat type wire (CN702)
Flat type wire (CN701)
Click on the first or last page to see other CMT-SD1 / CMT-SD3 / HCD-SD1 service manuals if exist.