Read Sony CMT-PX333 / HCD-PX333 Service Manual online
31
HCD-PX333
MC COLD RESET
• The cold reset clears all data including preset data stored in the RAM to initial conditions. Execute this mode when returning the set to
the customer.
Procedure:
1. Press the
1. Press the
?
/1
button to turn the power on.
2. Press three buttons of
[VOLUME ]
,
[REC MODE]
, and
x
(MD) simultaneously.
3. The set is reset, and displays “See you”, then becomes standby status.
AMP TEST
Procedure:
1. Press the
1. Press the
?
/1
button to turn the power on.
2. Press three buttons of
.m TUNING – , M > TUNING +
,and
M >
(MD) simultaneously.
3. Each buttons are pressed, it changes display as follows.
Button
Display
x
(CD)
7[TESTMIN]
REC MODE
8[TESTMID]
x
(MD)
9[TESTMAX]
4. Press the
[VOLUME +]
button, the display switches “VOLUME 21” to “VOLUME MAX”. And the display returns to the original
display after a few second.
5. Press the
[VOLUME -]
button, the display switches “VOLUME 21” to “VOLUME MIN”. And the display returns to the original
display after a few second.
6. To release from this mode, press the
?
/1
button to turn the power off and cold reset.
VERSION DISPLAY
Procedure:
1. Press the
1. Press the
?
/1
button to turn the power on.
2. Press three buttons of
.m TUNING – , M > TUNING +
, and
[TUNER/BAND]
simultaneously.
3. Enter the version display mode and STR version is shown in the upper position, the distination is shown in the lower position
4. Each time the
4. Each time the
x
(MD) button is pressed, it changes display STR version
→ CD version → MD version → STR version → ...
5. To release from this mode, press the
?
/1
button to turn the power off.
LCD AND LED TEST
Procedure:
1. Press the
1. Press the
?
/1
button to turn the power on.
2. Press three buttons of
.m TUNING – , M > TUNING +
, and
x
(MD) simultaneously.
3. Liquid crystal display and LEDs are all turned on.
4. Each time the
4. Each time the
x
(MD) button is pressed, it changes display all turned on
→ all turned off → pattern 1 → pattern 2 → all turned on → ...
5. Each time the
x
(CD) button is pressed, it changes LED indication all turned on
→ all turned off →
“?/1”
→
“
REC
”
→
“N”
(MD)
→
“X”
(MD)
→
“N”
(CD)
→
“X”
(CD)
→ all turned on → ...
6. To release from this mode, press the
?
/1
button to turn the power off.
–
SECTION 4
TEST MODE
Note 1:
About “R”
As this unit has only a few buttons, some operations require the use of remote commander (RM-S55EN/provided with unit: 1-476-664-21)
buttons. These operations are indicated as “R” in this manual.
Example:
As this unit has only a few buttons, some operations require the use of remote commander (RM-S55EN/provided with unit: 1-476-664-21)
buttons. These operations are indicated as “R” in this manual.
Example:
MENU/NO “R”
...Press the
[MENU/NO]
button of the remote commander.
Note 2:
Incorrect operations may be performed if the MD test mode is not entered properly.
In this case, press the ?
In this case, press the ?
/1
button to turn the power off, and retry to enter the MD test mode.
KEY TEST
Procedure:
1. Press the
1. Press the
?
/1
button to turn the power on.
2. Press three buttons of
.m TUNING – , M > TUNING +
, and
.m (MD)
simultaneously.
3. Enter the key test mode and display “KEY00”.
4. Each time a button is pressed, “KEY” value increases. However, once a button is pressed, it is no longer taken into account.
5. To release from this mode, press three buttons in the same manner as step 2 , or disconnect the power cord.
4. Each time a button is pressed, “KEY” value increases. However, once a button is pressed, it is no longer taken into account.
5. To release from this mode, press three buttons in the same manner as step 2 , or disconnect the power cord.
PATTERN 1
PATTERN 2
CD
DBFB
OVER
TRACK
TOC
SYNC
IT HCMS
2 MONO
PRESET
SHUFFLE
c
DAILY
c
REC 2
1
MD
OVER
DISC
TEXT
S.F EDIT
NORM
REC
L-SYNC
HIGH
LP 4
MONO
TUNED
MANUAL AUTO
PROGRAM REPEAT
1 3 SLEEP
Click on the first or last page to see other CMT-PX333 / HCD-PX333 service manuals if exist.