CMT-NEZ3, CMT-NEZ5, HCD-NEZ3, HCD-NEZ5 (serv.man3) - Sony Audio Service Manual (repair manual). Page 31

Read Sony CMT-NEZ3 / CMT-NEZ5 / HCD-NEZ3 / HCD-NEZ5 (serv.man3) Service Manual online

31
HCD-NEZ3/NEZ5
Pin No.
Pin Name
I/O
Description
46
O-POWER
O
Power relay drive signal output terminal     "H":  on
47
I-SUFFIX
I
Model destination setting terminal
48
I-RE-VOL
I
Dial pulse input of the rotary encoder (for VOLUME control)
49
I-MP3-REQ
I
MP3 data request signal input from the CD DSP
50
I-MP3-ACK
I
MP3 acknowledge signal input from the CD DSP
51 to 53
MD2 to MD0
-
Not used
54
RESET
I
Reset signal input from the reset switch    "L": reset
For several hundreds msec. after the power supply rises, "L" is input, then it changes to "H"
55
O-TU-CE
O
Chip enable signal output to the tuner (FM/AM)
56
O-TU-CLK
O
serial data transfer clock signal output to the tuner (FM/AM)
57
O-TU-DI
O
Serial data output to the tuner (FM/AM)
58
VLCD
-
Terminal for doubler circuit capacitor connection to develop liquid crystal display drive voltage
59 to 62
COM0 to COM3
O
Common drive signal output to the liquid crystal display
63, 64
SEG0, SEG1
O
Segment drive signal output to the liquid crystal display
65
VCC
-
Power supply terminal (+3.2V)
66
GND
-
Ground terminal
67 to 89
SEG2 to SEG24
O
Segment drive signal output to the liquid crystal display
90
VCC
-
Power supply terminal (+3.2V)
91
VSS
-
Ground terminal
92
XI
I
Main system clock input terminal (4.19 MHz)
93
XO
O
Main system clock output terminal (4.19 MHz)
94 to 100 SEG25 to SEG31
O
Segment drive signal output to the liquid crystal display
Page of 45
Display

Click on the first or last page to see other CMT-NEZ3 / CMT-NEZ5 / HCD-NEZ3 / HCD-NEZ5 (serv.man3) service manuals if exist.