CMT-NE5, HCD-NE5 - Sony Audio Service Manual (repair manual). Page 4

4

The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.

The laser beam on this model is concentrated so as to be focused
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emis-
sion, observe from more than 30 cm away from the objective lens.

Carry out the “S curve check” in “CD section adjustment” and
check that the S curve waveforms is output three times.

MODEL

Power Voltage Incdication

Canadian and

AC: 120 V 60 Hz 50 W

Mexican models

AEP and UK models

AC: 230 V - 50/60 Hz 57 W

Australian model

AC: 230 – 240 - 50/60 Hz 65 W

Korean model

AC: 220 V - 60 Hz 58 W

Taiwan model

AC: 120 V 50/60 Hz 50 W

Other models

AC: 110 – 120/

220 – 240 V 50/60 Hz 65 W

Power Voltage Indication

•

In order to separate wire (flat type) from no shield portion of TC wire, stick filament tapes, as shown in a figure.

wire (flat type)

filament tape

head wire

TC wire (no shield portion)

main board