Read Sony CMT-M90DVD / HCD-M90 Service Manual online
8
HCD-M90
Ver 1.4
– SWITCH BOARD (Component Side) –
Former : 1-685-426-11
New
New
: 1-685-426-12
– POWER BOARD (Component Side) –
Former : 1-685-429-11
New
New
: 1-685-429-12, -21
SILVER: KHM-240AAA (TYPE A)
BLACK: KHM-270AAA (TYPE B)
BLACK: KHM-270AAA (TYPE B)
optical device
TYPE A/B DISCRIMINATION
NOTE OF REPLACING THE DVD BOARD
When replacing the DVD board, since the adjustment value is not
set up correctly, “Drive Auto Adjustment” can’t be performed.
In this case, initialize Memory in the following procedures.
set up correctly, “Drive Auto Adjustment” can’t be performed.
In this case, initialize Memory in the following procedures.
Procedure:
1. Set the test mode. (See page 18)
2. Press the
1. Set the test mode. (See page 18)
2. Press the
[2]
key of the remote commander, and set the “DRIVE
MANUAL OPERATION”. (See page 23)
3. Press the
[6]
key of the remote commander, and set the “2-6,
Memory Check”. (See page 25)
4. Press the
[CLEAR]
key of the remote commander, and initial-
ize Memory.
Click on the first or last page to see other CMT-M90DVD / HCD-M90 service manuals if exist.