CMT-M373NT, HCD-M373 - Sony Audio Service Manual (repair manual). Page 5

5

One of the following messages may appear or 
flash in the display during operation.

You tried to label a CD-TEXT di sc.

There is no disc in the player.

There are already 50 disc titles stored in the system.

You have reached the end of the disc while pressing 
M during playback or pause.

You tried to program 26 or more tracks (steps).

All the tracks on an MD are registered into groups.

The MD deck is pausing the recording because 
silence continued for 30 seconds or more during 
digital recording.

The inserted recordable MD is new, or all tracks on 
the MD have been erased.

• A pre-mastered MD is in the deck.

• You tried to edit in Program or Shuffle Play mode.

• The track is recorded in MDLP mode.

• A pre-mastered MD is in the deck.

• The function is switched to MD or PC.

• There is no disc in the MD deck, or the MD is 

protected against erasure.

• There is no time remaining on the MD.

The editing operation of the MD is completed.

There is no time remaining on the MD.

The MD deck is ejecting the MD. 

An attempt was made to create a new group in 
excess of the maximum number of groups, or there 
are insufficient characters for updating the group 
management information.

• You tried to make an impossible editing 

operation.

• You cannot perform Net MD operations during 

timer playback.

• You cannot combine or erase the tracks due to the 

system limitations of MDs.

Adjustment of the recording level after recording or 
Fade-in and Fade-out procedures have failed since 
the system was either subject to vibration or there is 
a damaged or dirty disc in the tray. 

The power was off for a long time, so the system is 
initializing itself.

There is no more space to store track, disc or group 
titles.

While attempting to change the recording level after 
recording, you pressed ENTER/YES without 
actually changing the recording level, so no change 
was made.

There is no disc in the MD deck.

You have reached the end of the MD while pressing 
M during pause mode.

You pressed an invalid button during playback. 

The MD is playing the specified point for 
confirmation during the A-B Erase Function and the 
Divide Function (pages 30 and 33).

A reading failure has occurred, and the system is 
trying to read the data again.

You attempted to perform another operation while 
in S.F Edit (changing the recording level after 
recording, Fade-in, Fade-out) mode.