CMT-M333NT, HCD-M333 - Sony Audio Service Manual (repair manual). Page 8

8

Error Code

Description

10

11

12

20

21

22

23

24

30

31

40

41

42

43

50

51

Could not perform loading

The changer error occurred

Loading switches combined incorrectly

Timed out without reading the top of PTOC

Could read top of PTOC, but detected error

Timed out without accessing UTOC

Timed out without reading UTOC

Error in UTOC

Could not start playback

Error in sector

A cause of retry occurred during normal recording

Retried due to DRAM overflow

Retry occurred during TOC writing

Retry aborted during S.F editing

Other than access processing, and could not read address.

Focus NG occurred and overran.

tm refresh

op change

spdl change

Mode for erasing the accumulated recording time and accumulated playing time.
Procedure
1. Press the  TIMER SET “R”  button when displayed as “tm refresh”.
2. When the display changes to “tm refresh?”, press the  ENTER/YES “R”  button.
When “Complete!” is displayed, it means erasure has completed.

Mode for erasing the accumulated time of op rec tm, op play tm.
Use these histories as a guide line for the time of replacement of the optical pick-up. If the optical pick-up
has been replaced, perform this procedure and erase the past history.
Procedure
1. Press the  TIMER SET “R”  button when displayed as “op change”.
2. When the display changes to “op change?”, press the  ENTER/YES “R”  button.
When “Complete!” is displayed, it means erasure has completed.

Mode for erasing the accumulated spdl rp tm time
Use these histories as the guide line for the time of replacement of the spindle motor. If the spindle motor has
been replaced, perform this procedure and erase the past history.
Procedure
1. Press the  TIMER SET “R”  button when displayed as “spdl change”
2. When the display changes to “spdl change?”, press the  ENTER/YES “R”  button.
When “Complete!” is displayed, it means erasure has completed.

Display

History