Read Sony CMT-M100MD / HCD-M10 Service Manual online
65
HCD-M10
Pin No.
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96 to 98
99
100
I/O
—
O (3)
I (A)
O (A)
I (A)
I (A)
I (A)
I (A)
I (A)
I (A)
I (A)
O (A)
—
I (A)
I (A)
—
I (A)
I (A)
I (A)
I (A)
I (S)
O
O
O
O
O
O
O
O
—
O
O
O
O
O
O
O
I (S)
I
—
O
Pin Name
AVSS
PCO
FILI
FILO
CLTV
PEAK
BOTM
ABCD
FE
AUX1
VC
ADIO
AVDD
ADRT
ADRB
AVSS
SE
TE
DCHG
APC
ADFG
F0CNT
XLRF
CKRF
DTRF
APCREF
TEST0
TRDR
TFDR
DVDD
FFDR
FRDR
FS4
SRDR
SFDR
SPRD
SPFD
FGIN
TEST1 to TEST3
DVSS
EFMO
Description
Ground (Analog)
Phase comparison output for the recording/playback EFM master PLL
Filter input for the recording/playback EFM master PLL
Filter output for the recording/playback EFM master PLL
Internal VCO control voltage input for the recording/playback EFM master PLL
Light amount signal peak hold input from the CXA2523AR
Light amount signal bottom hold input from the CXA2523AR
Light amount signal input from the CXA2523AR
Focus error signal input from the CXA2523AR
Auxiliary A/D input
Middle point voltage (+1.5V) input from the CXA2523AR
Monitor output of the A/D converter input signal (Not used)
+3V power supply (Analog)
A/D converter operational range upper limit voltage input (Fixed at “H”)
A/D converter operational range lower limit voltage input (Fixed at “L”)
Ground (Analog)
Sled error signal input from the CXA2523AR
Tracking error signal input from the CXA2523AR
Connected to +3V power supply
Error signal input for the laser digital APC (Fixed at “L”)
ADIP duplex FM signal input from the CXA2523AR (22.05
±
1 kHz)
Filter f0 control output to the CXA2523AR
Control latch output to the CXA2523AR
Control clock output to the CXA2523AR
Control data output to the CXA2523AR
Reference PWM output for the laser APC
PWM output for the laser digital APC (Not used)
Tracking servo drive PWM output (–)
Tracking servo drive PWM output (+)
+3V power supply (Digital)
Focus servo drive PWM output (+)
Focus servo drive PWM output (–)
176.4 kHz clock signal output (X’tal) (Not used)
Sled servo drive PWM output (–)
Sled servo drive PWM output (+)
Spindle servo drive PWM output (–)
Spindle servo drive PWM output (+)
Test input (Fixed at “L”)
Ground (Digital)
EFM output when recording
• Abbreviation
EFM: Eight to Fourteen Modulation
PLL : Phase Locked Loop
VCO: Voltage Controlled Oscillator
PLL : Phase Locked Loop
VCO: Voltage Controlled Oscillator
Click on the first or last page to see other CMT-M100MD / HCD-M10 service manuals if exist.