Read Sony CMT-G1BIP / CMT-G1IP / CMT-G2BNIP / CMT-G2NIP / SS-CG1 Service Manual online
SERVICE MANUAL
Sony Corporation
Published by Sony Techno Create Corporation
SS-CG1
SPECIFICATIONS
SPEAKER SYSTEM
9-893-208-02
2011J33-1
©
2011.10
AEP Model
UK Model
Australian Model
Chinese Model
Ver. 1.1 2011.10
• SS-CG1 is the speaker system in CMT-G1BiP/G1iP/G2BNiP/G2NiP.
EXPLODED VIEW
1
A-1814-242-A OVERALL ASSY (1 piece)
2
X-2580-806-1 GRILLE
FRAME
ASSY
3
2-889-967-01 HEX (2.5 mm) SCREW 3.5 X 20
4
4-274-431-01 RING
(WF)
SP1
1-858-631-11 LOUDSPEAKER (2.5 cm) (Tweeter)
SP2
1-858-630-11 LOUDSPEAKER (13 cm) (Woofer)
#1
7-685-533-14 SCREW +BTP 2.6 X 6 TYPE2 N-S
Ref. No.
Part No.
Description
Remark
Speaker system: 2 way speaker system, Bass reflex
Speaker units:
Speaker units:
Woofer 130 mm, cone type
Tweeter 25 mm, soft dome type
Tweeter 25 mm, soft dome type
Rated impedance: 6 ohms
Dimensions (W/H/D):
Dimensions (W/H/D):
Approx. 160 mm × 270 mm × 252 mm
Mass: Approx. 3.8 kg net per speaker
Design and specifications are subject to change
without notice.
without notice.
ring (WF)
boss
boss
hole
hole
loudspeaker (13 cm)
(SP2)
(SP2)
screw
(BTP2.6
(BTP2.6
u 6)
screw
(BTP2.6
(BTP2.6
u 6)
1
2
3
3
4
SP1
SP2
#1
#1
Note when loudspeaker (13 cm) (SP2) and ring (WF)
are installed
When you install the loudspeaker (13 cm) (SP2) to the ring (WF),
set two holes of loudspeaker (13 cm) (SP2) to the position of two
bosses of tje ring (WF).
are installed
When you install the loudspeaker (13 cm) (SP2) to the ring (WF),
set two holes of loudspeaker (13 cm) (SP2) to the position of two
bosses of tje ring (WF).
SS-CG1
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2011.06
New
1.1
2011.10
Addition of Australian model
Addition of System model name (CMT-G2BNiP/G2NiP)
Display
