CMT-EX200, HCD-EX200 - Sony Audio Service Manual (repair manual). Page 6

6

Displaying the CD Text
• This unit is equipped with a simple CD text display function.

The text is displayed only for the first 20 songs. As it will not be displayed from the 21st song, do not suspect a fault.
In some cases, special characters may not be displayed or may be substituted by other characters. This is not a fault.

Aging Mode
• The aging mode automatically repeats the operations of the CD.

When an error occurs:
Aging stops
When no error occurs:
Aging is performed repeatedly.

Procedure:
1. Set any CD. (One with a short playback time of the final track is recommended.)
2. While pressing the  FUNCTION  button and the  

^  button, connect the power plug to the outlet.

3. When the test mode is set, the characters “STEP” is displayed on the LCD.
4. When the  

^  button is pressed while pressing the   DISPLAY  button, “AGING” will be displayed, and aging is performed in the

following sequence. While aging is performed, “REP” will be displayed blinking.

5. Pressing the  DISPLAY  button during aging displays the cycle number (@ CY where @ is the number of agings).
6. To end aging, press the  

1/u  button, turn OFF the power, and disconnect the power plug from the outlet.

DISPLAY button

Note : Press  DISPLAY  button 
           with a thing a fine point 
           from the bottom of front panel.