Read Sony CMT-DX400 / CMT-DX400A / HCD-DX400 Service Manual online
HCD-DX400/DX400A
2
SAFETY-RELATED COMPONENT WARNING!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
TABLE OF CONTENTS
NOTES ON CHIP COMPONENT REPLACEMENT
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
FLEXIBLE CIRCUIT BOARD REPAIRING
• Keep the temperature of soldering iron around 270 °C during
• Keep the temperature of soldering iron around 270 °C during
repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specifi ed herein may result in hazardous radia-
tion exposure.
Use of controls or adjustments or performance of procedures
other than those specifi ed herein may result in hazardous radia-
tion exposure.
This appliance is classifi ed as
a CLASS 1 LASER product.
This marking is located on the
rear exterior.
a CLASS 1 LASER product.
This marking is located on the
rear exterior.
1.
SERVICING NOTES
.............................................. 3
2. DISASSEMBLY
2-1. Disassembly
Flow
........................................................... 7
2-2. Cover
(Top)
..................................................................... 7
2-3. Front Panel Block ........................................................... 8
2-4. Knob
2-4. Knob
(Volume)
............................................................... 8
2-5. DVD
Block
..................................................................... 9
2-6. MAIN
Board
................................................................... 10
2-7. FFC
Holder
..................................................................... 10
2-8. Optical Pick-up Block (KHM-313CAA) ........................ 11
2-9. Belt
2-9. Belt
.................................................................................. 11
3. DIAGRAMS
3-1. Block
Diagram
................................................................ 12
3-2. Printed Wiring Board - MAIN Board - ........................... 13
3-3. Schematic Diagram - MAIN Board (1/2) (DX400) - ..... 14
3-4. Schematic Diagram - MAIN Board (2/2) (DX400) - ..... 15
3-5. Schematic Diagram - MAIN Board (1/2) (DX400A) - ... 16
3-6. Schematic Diagram - MAIN Board (2/2) (DX400A) - ... 17
3-7. Printed Wiring Board - CONTROL Board - ................... 18
3-8. Schematic Diagram - CONTROL Board - ...................... 19
3-3. Schematic Diagram - MAIN Board (1/2) (DX400) - ..... 14
3-4. Schematic Diagram - MAIN Board (2/2) (DX400) - ..... 15
3-5. Schematic Diagram - MAIN Board (1/2) (DX400A) - ... 16
3-6. Schematic Diagram - MAIN Board (2/2) (DX400A) - ... 17
3-7. Printed Wiring Board - CONTROL Board - ................... 18
3-8. Schematic Diagram - CONTROL Board - ...................... 19
4.
EXPLODED VIEWS
4-1. Cover
Section
.................................................................. 25
4-2. Front Panel Section ......................................................... 26
4-3. MAIN Board Section ...................................................... 27
4-4. Chassis
4-3. MAIN Board Section ...................................................... 27
4-4. Chassis
Section
............................................................... 28
4-5. DVD Mechanism Deck Section ...................................... 29
• This system incorporates Dolby* Digital.
* Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS
* Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS
and Thomson.
• DivX
®
, DivX Certifi ed
®
and associated logos are registered trademarks of DivX,
Inc. DivX grants licensees the right to use the DivX trademark.
ABOUT DIVX VIDEO: DivX
®
is a digital video format created by DivX, Inc.
This is an offi cial DivX Certifi ed device that plays DivX video.
Visit www.divx.com for more information and software tools to convert your fi les
into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certifi ed
®
device must be
registered in order to play DivX Video-on-Demand (VOD) content. To generate
the registration code, locate the DivX VOD section in the device setup menu. Go
to vod.divx.com with this code to complete the registration process and learn more
about DivX VOD.
the registration code, locate the DivX VOD section in the device setup menu. Go
to vod.divx.com with this code to complete the registration process and learn more
about DivX VOD.
• Windows Media is either a registered trademark or trademark of Microsoft Corpo-
ration in the United States and/or other countries.
• This product contains technology subject to certain intellectual property rights of
Microsoft. Use or distribution of this technology outside of this product is prohib-
ited without the appropriate license(s) from Microsoft.
ited without the appropriate license(s) from Microsoft.
• ABOUT MPEG-4 VISUAL: THIS PRODUCT IS LICENSED UNDER THE
MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL
AND NONCOMMERCIAL USE OF A CONSUMER FOR DECODING VIDEO
IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VID-
EO”) THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL
AND ONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO.
AND NONCOMMERCIAL USE OF A CONSUMER FOR DECODING VIDEO
IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VID-
EO”) THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL
AND ONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO.
NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER
USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO
PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING
MAY BE OBTAINED FROM MPEG LA, LLC. SEE http://www.mpegla.com/
PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING
MAY BE OBTAINED FROM MPEG LA, LLC. SEE http://www.mpegla.com/
• All other trademarks and registered trademarks are of their respective holders.
In this manual, ™ and ® marks are not specifi ed.
In this manual, ™ and ® marks are not specifi ed.
General
Power requirements
Chilean and Peruvian models:
Power requirements
Chilean and Peruvian models:
110 V – 120 V/220 V – 240 V AC, 50/60Hz, Adjutable with
voltage selector
voltage selector
Mexican model:
120 V AC, 60 Hz
Taiwan model:
120 V AC, 50/60 Hz
Korean model:
220 V – 240 V -, 60 Hz
Other models:
220 V – 240 V AC, 50/60 Hz
Power consumption:
On: 25
On: 25
watts
Standby: 0.5
watts
Dimensions (w/h/d) (excl. speakers):
Approx. 175 × 240 × 210 mm
Mass (excl. speakers): 2.4 kg
Design and specifi cations are subject to change without notice.
Ver. 1.5
Click on the first or last page to see other CMT-DX400 / CMT-DX400A / HCD-DX400 service manuals if exist.