Read Sony CMT-CPZ2 / HCD-CPZ2 Service Manual online
5
HCD-CPZ2
Other Operations
Creating your own CD program
(Program Play)
Use buttons on the remote to create your own program.
1
Press CD ̣ to select the CD function.
2
Press PLAY MODE ̘ repeatedly until “PGM” appears
while the player is stopped.
while the player is stopped.
3
Press Ã/Ñ ̞ repeatedly until the desired
track number appears.
When programming MP3 files, press
track number appears.
When programming MP3 files, press
+/ˋ ̡
repeatedly to select the desired group, and then select
the desired file.
the desired file.
Selected track or
file number
file number
Total playing time of program
(including selected track or file)
(including selected track or file)
4
Press ENTER ̠ to add the track or file to the
program.
“ˋ ˋ.ˋ ˋ” appears when the total time exceeds 100
minutes for a disc, or when you select a CD track
whose number is 21 or over, or when you select an
MP3 file.
program.
“ˋ ˋ.ˋ ˋ” appears when the total time exceeds 100
minutes for a disc, or when you select a CD track
whose number is 21 or over, or when you select an
MP3 file.
5
Repeat steps 3 through 4 to program additional
tracks or files, up to a total of 25 tracks or files.
tracks or files, up to a total of 25 tracks or files.
6
To play your program of tracks or files, press à
(play) ̯.
The program remains available until you eject the
disc. To play the same program again, select the CD
function, and press à (play) ̯.
(play) ̯.
The program remains available until you eject the
disc. To play the same program again, select the CD
function, and press à (play) ̯.
To cancel Program Play
Press PLAY MODE ̘ repeatedly until “PGM”
disappears while the player is stopped.
disappears while the player is stopped.
To delete the last track or file of the program
Press CLEAR ̮ while the player is stopped.
To view program information, such as total
track number of the program
track number of the program
Press DISPLAY ̗ repeatedly.
Tip
You can also use the jog dial ȴ on the unit to select files in step 3.
You can also use the jog dial ȴ on the unit to select files in step 3.
Turn the jog dial ȴ and press PUSH ENTER ȵ on the unit to select
the desired group, and then select the desired file.
Presetting radio stations
You can preset your favorite radio stations and tune
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
1
Tune in the desired station (see “Listening to the
radio”).
radio”).
2
Press TUNER MEMORY ̰.
Preset number
3
Press +/ˋ ̞ repeatedly to select your desired
preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
4
Press ENTER ̠.
5
Repeat steps 1 through 4 to store other stations.
You can preset up to 20 FM and 10 AM stations. The
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
You can preset up to 20 FM and 10 AM stations. The
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
6
To call up a preset radio station, press TUNING
MODE ̘ repeatedly until “PRESET” appears, and
then press +/ˋ ̞ repeatedly to select the desired
preset station.
MODE ̘ repeatedly until “PRESET” appears, and
then press +/ˋ ̞ repeatedly to select the desired
preset station.
Recording onto a tape
You can record on a TYPE I (normal) tape in two ways:
CD Synchro Recording:
You can record an entire CD onto a tape.
Manual Recording:
You can record just the portions you like from a sound
source, including connected audio components.
Use buttons on the unit to control tape recording.
source, including connected audio components.
Use buttons on the unit to control tape recording.
1
Load a recordable tape with the side you want to
record facing forward.
record facing forward.
2
Prepare the tape deck for recording.
Press FUNCTION ̛ repeatedly to select the tape
function.
Press DIRECTION ̘ on the unit repeatedly and
select “«” to record on one side, or “¬” or “®”
to record on both sides.
To switch the recording sides of the tape, press
TAPE úà (play) ̜ repeatedly (“Ô” appears for
recording on the front, and “î” for the reverse side),
and then press TAPE Ą (stop) ̜.
Press FUNCTION ̛ repeatedly to select the tape
function.
Press DIRECTION ̘ on the unit repeatedly and
select “«” to record on one side, or “¬” or “®”
to record on both sides.
To switch the recording sides of the tape, press
TAPE úà (play) ̜ repeatedly (“Ô” appears for
recording on the front, and “î” for the reverse side),
and then press TAPE Ą (stop) ̜.
3
Prepare the recording source.
For CD Synchro Recording:
Press FUNCTION ̛ repeatedly to select the CD
function.
Load the disc you want to record.
When recording a group from an MP3 disc, press
PLAY MODE ̘ repeatedly to select “
Press FUNCTION ̛ repeatedly to select the CD
function.
Load the disc you want to record.
When recording a group from an MP3 disc, press
PLAY MODE ̘ repeatedly to select “
,” and then
press
+/ˋ ̡ repeatedly to select the desired
group.
To record only your favorite CD tracks in your desired
order, perform steps 2 through 5 of “Creating your
own CD program.”
For Manual Recording:
Select the desired source to record.
To record only your favorite CD tracks in your desired
order, perform steps 2 through 5 of “Creating your
own CD program.”
For Manual Recording:
Select the desired source to record.
4
Set the tape deck to stand by for recording.
For CD Synchro Recording:
Press CD SYNCHRO ̚.
For Manual Recording:
Press TAPE Ć REC ̜.
Press CD SYNCHRO ̚.
For Manual Recording:
Press TAPE Ć REC ̜.
5
Start recording.
While recording, you cannot listen to other sources.
For CD Synchro Recording:
Press TAPE ê (pause) ̜. When the recording is
completed, the CD player and the tape deck stop
automatically. If both sides of the tape are being
recorded on, and the tape reaches the end of the front
side part-way through a track, the entire track is
recorded again from the beginning of the reverse side.
For Manual Recording:
Press TAPE ê (pause) ̜, and then start playing the
desired recording source.
If there is noise while recording from the tuner,
reposition the appropriate antenna to reduce the
noise.
While recording, you cannot listen to other sources.
For CD Synchro Recording:
Press TAPE ê (pause) ̜. When the recording is
completed, the CD player and the tape deck stop
automatically. If both sides of the tape are being
recorded on, and the tape reaches the end of the front
side part-way through a track, the entire track is
recorded again from the beginning of the reverse side.
For Manual Recording:
Press TAPE ê (pause) ̜, and then start playing the
desired recording source.
If there is noise while recording from the tuner,
reposition the appropriate antenna to reduce the
noise.
To stop recording
Press TAPE Ą (stop) ̜ or CD Ą (stop) Ⱥ (for CD
Synchro Recording only).
Synchro Recording only).
To pause recording (Manual Recording only)
Press TAPE
TAPE ê (pause) ̜.
Notes
ˎ
ˎ
Recording stops if you change to a different function.
ˎ
You cannot eject the disc during CD Synchro Recording.
Tips
ˎ
ˎ
If you stop the CD Synchro Recording by pressing CD Ą (stop) Ⱥ,
the tape stops after making about a 4 seconds blank (unrecorded)
space before stopping.
ˎ
When you record on both sides, be sure to start from the front side.
If you start from the reverse side, recording stops at the end of the
reverse side.
Using the Timers
The system offers three timer functions. You cannot
activate both the Play Timer and the Rec Timer at the
same time. If you use either with the Sleep Timer, the
Sleep Timer has priority.
activate both the Play Timer and the Rec Timer at the
same time. If you use either with the Sleep Timer, the
Sleep Timer has priority.
Sleep Timer:
You can fall asleep to music. This function works even if
the clock is not set.
Press SLEEP ̱ on the remote repeatedly. If you select
“AUTO,” the system automatically turns off after the
current disc or tape stops or in 100 minutes.
the clock is not set.
Press SLEEP ̱ on the remote repeatedly. If you select
“AUTO,” the system automatically turns off after the
current disc or tape stops or in 100 minutes.
Play Timer:
You can wake up to CD, tape or tuner at a preset time.
Rec Timer:
You can record a preset radio station at a specified time.
Use buttons on the remote to control the Play Timer and
the Rec Timer. Make sure you have set the clock.
Use buttons on the remote to control the Play Timer and
the Rec Timer. Make sure you have set the clock.
1
Prepare the sound source.
For Play Timer:
Prepare the sound source, and then press VOLUME
+/ˋ ̤ to adjust the volume.
To start from a specific CD track or MP3 file, create
your own CD program.
For Rec Timer:
Tune in the preset radio station.
Prepare the sound source, and then press VOLUME
+/ˋ ̤ to adjust the volume.
To start from a specific CD track or MP3 file, create
your own CD program.
For Rec Timer:
Tune in the preset radio station.
2
Press CLOCK/TIMER SET ̬.
3
Press Ã/Ñ ̞ repeatedly to select “PLAY SET”
or “REC SET” then press ENTER ̠.
“ON TIME” appears, and the hour indication flashes.
or “REC SET” then press ENTER ̠.
“ON TIME” appears, and the hour indication flashes.
4
Set the time to start playing or recording.
Press Ã/Ñ ̞ repeatedly to set the hour, and
then press ENTER ̠.
The minute indication flashes. Use the procedure
above to set the minute.
then press ENTER ̠.
The minute indication flashes. Use the procedure
above to set the minute.
5
Use the same procedure as in step 4 to set the time
to stop playing or recording.
to stop playing or recording.
6
Select the sound source or prepare the tape.
For Play Timer:
Press Ã/Ñ ̞ repeatedly until the desired
sound source appears, and then press ENTER ̠. The
display shows the timer settings.
For Rec Timer:
Load a recordable tape and press TAPE ̜ to select
the tape function.
Press DIRECTION ̘ on the unit repeatedly and
select “«” to record on one side, or “¬” or “®”
to record on both sides.
To switch the recording sides of the tape, press à
(play) ̯ repeatedly (“Ô” appears for recording on the
front, and “î” for the reverse side), and then press Ą
(stop) ̥.
Press Ã/Ñ ̞ repeatedly until the desired
sound source appears, and then press ENTER ̠. The
display shows the timer settings.
For Rec Timer:
Load a recordable tape and press TAPE ̜ to select
the tape function.
Press DIRECTION ̘ on the unit repeatedly and
select “«” to record on one side, or “¬” or “®”
to record on both sides.
To switch the recording sides of the tape, press à
(play) ̯ repeatedly (“Ô” appears for recording on the
front, and “î” for the reverse side), and then press Ą
(stop) ̥.
7
Press ÒÄÆ (power) ȩ to turn off the system.
The system turns on 15 seconds before the preset time.
If the system is on at the preset time, the Play Timer
and the Rec Timer will not play or record.
The system turns on 15 seconds before the preset time.
If the system is on at the preset time, the Play Timer
and the Rec Timer will not play or record.
To activate or check the timer again
Press CLOCK/TIMER SELECT ̬, press Ã/Ñ ̞
repeatedly until “PLAY SEL” or “REC SEL” appears, and
then press ENTER ̠.
repeatedly until “PLAY SEL” or “REC SEL” appears, and
then press ENTER ̠.
To cancel the timer
Repeat the same procedure as above until “TIMER OFF”
appears, and then press ENTER ̠.
appears, and then press ENTER ̠.
To change the setting
Start over from step 1.
Tips
ˎ
ˎ
The Play Timer setting remains as long as the setting is not canceled
manually.
ˎ
The Rec Timer is canceled automatically after the Rec Timer has
been activated.
ˎ
The volume is reduced to minimum during the Rec Timer.
Click on the first or last page to see other CMT-CPZ2 / HCD-CPZ2 service manuals if exist.