Read Sony CMT-CP11 / CMT-CP11K / HCD-CP11 Service Manual online
13
Playback level Confirmation and Adjustment
Procedure:
Mode: Playback
Mode: Playback
Confirm playback level is within specification values as follows.
If these levels are out of specification values, adjust the RV151 (L-
CH) and RV251 (R-CH) on the MAIN board so that the level meter
reading become within specification values.
If these levels are out of specification values, adjust the RV151 (L-
CH) and RV251 (R-CH) on the MAIN board so that the level meter
reading become within specification values.
Specification values:
PJ301 PB level: 301.5 to 338.3 mV (–8.2 to –7.2 dB) level difference
between the channels: within ±0.5 dB
PJ301 PB level: 301.5 to 338.3 mV (–8.2 to –7.2 dB) level difference
between the channels: within ±0.5 dB
Adjustment Location: MAIN board
REC Bias Confirmation and Adjustment
Procedure:
1.
1.
Mode: Record
2.
Mode: Playback
3.
Confirm playback the signal recorded in step 1 become
specification values as follows.
If these values are out of specification values, adjust the RV153
(L-CH) and RV253 (R-CH) on the MAIN board to repeat steps
1and 2.
specification values as follows.
If these values are out of specification values, adjust the RV153
(L-CH) and RV253 (R-CH) on the MAIN board to repeat steps
1and 2.
Specification values: Playback output of 315 Hz to playback
output of 10 kHz: ± 0.5 dB
Adjustment Location: MAIN board
+
–
–
set
test tape
WS-48B
(3 kHz, 0 dB)
WS-48B
(3 kHz, 0 dB)
MAIN board
LINE OUT jack (PJ301)
L-CH, R-CH
LINE OUT jack (PJ301)
L-CH, R-CH
frequency counter
REC Level Confirmation and Adjustment
Procedure:
1.
1.
Mode: Record
2.
Mode: Playback
3.
Confirm playback the signal recorded in step 1 become
specification values as follows.
If these values are out of specification values, adjust the RV252
(R-CH) and RV152 (L-CH) on the MAIN board to repeat steps
1 and 2.
specification values as follows.
If these values are out of specification values, adjust the RV252
(R-CH) and RV152 (L-CH) on the MAIN board to repeat steps
1 and 2.
Specification values:
PJ301 PB level: 47.2 to 53.0 mV (– 24.3 to – 23.3 dB)
PJ301 PB level: 47.2 to 53.0 mV (– 24.3 to – 23.3 dB)
Adjustment Location: MAIN board
– MAIN BOARD (Conductor Side) –
attenuator
set
MAIN board
MD IN jack (PJ301)
L-CH, R-CH
MD IN jack (PJ301)
L-CH, R-CH
1) 315 Hz
2) 10 kHz
2) 10 kHz
50 mV (–23.8 dB)
600
Ω
blank tape
CN-123
CN-123
AF OSC
+
–
–
set
recorded
portion
portion
MAIN board
LINE OUT jack (PJ301)
L-CH, R-CH
LINE OUT jack (PJ301)
L-CH, R-CH
level meter
set
MAIN board
MD IN jack (PJ301)
L-CH, R-CH
315 Hz, 50 mV (–23.8 dB)
MD IN jack (PJ301)
L-CH, R-CH
315 Hz, 50 mV (–23.8 dB)
blank tape
CS-123
CS-123
600
Ω
attenuator
AF OSC
+
–
–
set
recorded
portion
portion
MAIN board
LINE OUT jack (PJ301)
L-CH, R-CH
LINE OUT jack (PJ301)
L-CH, R-CH
level meter
PJ301
Playback Level
REC Bias
REC Level
RV252 (R)
IC352
LINE OUT (L/R)
MD IN (L/R)
VIDEO IN (L/R)
RV152 (L)
RV251 (R)
RV151 (L)
RV151 (L)
RV253 (R)
RV153 (L)
RV153 (L)
Click on the first or last page to see other CMT-CP11 / CMT-CP11K / HCD-CP11 service manuals if exist.