Read Sony CMT-C7NT / HCD-C7NT Service Manual online
17
HCD-C7NT
3-11. Base Section
5
two screws
(+P2 x 5)
4
Remove solderings from
the damper pins.
7
Remove the two damper
pins toward inside.
8
Slant the base block in the
direction of the arrow
B
and remove the base
block from the main unit in
a manner that the lock pin
passes through the groove
of the holder (L) as shown.
block from the main unit in
a manner that the lock pin
passes through the groove
of the holder (L) as shown.
0
base section
(
0
Remove the base block while the
mechanism is in the Loading IN state.)
lock pin
holder (L)
1
pick-up flexible
board
2
Remove the two hang-up
springs (FZ) as shown.
6
Move the holder (L) in the
direction of the arrow
A
.
A
B
3
Remove the two hang-up
springs (R) as shown.
9
Remove solderings.
Click on the first or last page to see other CMT-C7NT / HCD-C7NT service manuals if exist.