CMT-C5, HCD-C5 - Sony Audio Service Manual (repair manual). Page 19

19

1

 screw

    (+BV 3 x 8)

3

 tuner pack

    (After slanted toward outside, 
    remove it straight up toward outside.)

2

 wire (flat type)

    (11 core or 15 core)

wire (flat type)
(11 core or 15 core)

tuner pack

4

 connector

    (CN105)

AUDIO board

CN106

5

 D.C. fan

    (M901)

D.C.fan (M901)

Note for re-installation

When installing the tuner pack, insert the three harnesses 
connected to CN105 and connected to CN106 and
connected to CN108 of the AUDIO board, in between the
flat cable (11 core or 15 core) and the tuner pack in the
direction of the arrow so that the flat cable 
(11 core or 15 core) must be inserted.

CN108

CN105

4

 two screws

    (+BVTT  3 x 5)

9

 UCOM board

CN205

CN206

CN901

CN852

8

 AMP POWER baord

1

 wire (flat type) 

    (19 core) (CN101)

2

 wire (flat type) 

    (19 core) (CN203)

7

 board to board

    connector

6

 wire (flat type) 

    (16 core) (CN201)

5

 board to board

    connector

3

 connector

 

    (CN851)

A

A

Note for re-installation
(routing the harnesses)

 
Be careful that the two harnesses between 
CN995 and CN992 of the power transformer 
(T900) and the POWER board must not 
contact the heat sink (IC902) on the POWER 
board and the flat cable (19 core) that 
is inserted to CN203 on the UCOM board. 

wire (flat type)
(19 core)

CN203

CN851

CN995

CN992

power transformer (T900)

POWER baord

AMP POWER
board

UCOM board

heat sink (IC902)