Read Sony CMT-C5 / HCD-C5 Service Manual online
13
HCD-C5
3-5. FRONT BRACKET SECTION, LOADING MOTOR ASSY (M902)
1
FPC holder
B
2
screw
(M 2 x 2.5)
4
screw
(+P 2 x 3.0)
1
wire clamper
3
Move down the gear mount
bracket in the direction of the
arrow
arrow
B
.
6
screw
(+P 2 x 3)
7
screw
(M 2 x 4)
A
8
Remove it in the direction of
the arrow
A
from the left side
when viewed from the rear of
the front bracket.
the front bracket.
5
Remove the two
hang-up springs (FZ).
3
three claws
2
loading belt
4
Raise the
CONNECTOR board.
Note during re-assembling
When re-assembling, align the positions as shown.
1
front backet section
2
Remove two solderings.
3
loading motor assy (M902)
Click on the first or last page to see other CMT-C5 / HCD-C5 service manuals if exist.