Read Sony CFM-D1JMK2 / CFM-D1MK2 Service Manual online
CFM-D1JMK2/D1MK2
8
SECTION 3
ADJUSTMENTS
3-1. MECHANICAL ADJUSTMENTS
AND MEASUREMENTS
AND MEASUREMENTS
PRECAUTION
1. Clean the following parts with a denatured-alcohol-
moistened swab :
record/playback head
pinch roller
erase head
rubber belts
capstan
idlers
2. Demagnetize the record/playback head with a head
demagnetizer. (Do not bring the head demagnetizer
close to the erase head.)
close to the erase head.)
3. Do not use a magnetized screwdriver for the adjustments.
4. After the adjustments, apply suitable locking compound
4. After the adjustments, apply suitable locking compound
to the parts adjusted.
5. The adjustments should be performed with the rated
power supply voltage unless otherwise noted.
Torque Measurement
3-2. ELECTRICAL ADJUSTMENTS
CASSETE SECTION
Note : The adjustment should be performed in the order given in
this service manual.
r
Switches and controls should be set as follows unless
otherwise specified.
otherwise specified.
FUNCTION :
TAPE (RADIO OFF)
VOLUME :
max
TONE :
mechanical mid.
Torque
Torque Meter
Meter Reading
2.95 – 6.86mN• m
Playback
CQ-102C
(30-70g• cm)
(0.417-0.97oz• inch)
8.83 – 14.7mN• m
Rewind
CQ-201B
(90-150g• cm)
(1.24-2.08oz• inch)
8.83 – 14.7mN• m
Fast Forward
CQ-201B
(90-150g• cm)
(1.24-2.08oz• inch)
0.148 – 0.539mN •m
Back Tention
CQ-102C
(1.5-5.5g• cm)
(0.02-0.76oz• inch)
Tape Tension Measurement
Torque Meter
Meter Reading
CQ-403A
more than 170g (5.99 oz)
Standard Output Level
SP OUT
EARPHONE
load impedance
4
Ω
32
Ω
output level
0.775V (0dB)
0.25V (–10dB)
Type
Signal
Used for
WS-48A
3kHz, 0dB
Tape Speed Adjustment
P-4-A063
6.3kHz, – 10dB
Azimuth Adjustment
Test Tape
0 dB=0.775V
Tape Speed Adjustment
Procedure :
Mode : playback
digital frequency
counter
counter
32
Ω
test tape
WS-48A
(3kHz, 0dB)
WS-48A
(3kHz, 0dB)
Earphone jack
set
+
-
Digital frequency counter
2,940 – 3,090 Hz
Frequency difference between the beginning and the end of
the tape should be within 1.5% (45Hz).
the tape should be within 1.5% (45Hz).
Adjustment Value :
Click on the first or last page to see other CFM-D1JMK2 / CFM-D1MK2 service manuals if exist.