Read Sony CFM-A50 Service Manual online
– 7 –
SECTION 3
DIAL POINTER SETTING
Note :
Follow the instaooation procedure in the numerical order given.
1
Attach TU worm to tuner chassis.
2
Attach needle, tighten needle spring using a bolt, then attach TU
LED board.
LED board.
3
Rotate TU worm until needle stops at the stopper shown in Fig. A.
4
Mount PLATE BLIND and position it as shown in Fig. B.
5
Attach the band knob. Make sure that the projected part of the
tuner chassis fits as shown in Fig. C (the arrow).
tuner chassis fits as shown in Fig. C (the arrow).
6
Tighten idler gear, combine projected part of band knob and the
band slider so that they interlock, then mount to main board.
band slider so that they interlock, then mount to main board.
7
Mount VR gear to main board, then turn in the direction of the
arrow until it stops.
arrow until it stops.
8
Fasten the TU gear to the TU chassis with the screw.
3
Screw (+P 2.6x5)
Retainer, Pointer
Fig. A
Fig. B
Fig. C
1
Worm, TU
5
Knob, band
4
Plate, blind
2
Pointer
Chassis, TU
TUN LED board
Stopper
Screw (+BV 3x10)
Screws (+BV 3x10)
Screw (+BV 3x10)
Screw (+B 2.6x5)
7
Gear, VR
6
Gear, idler
8
Gear, TU
Main board
Slieder, band
Chassis, TU
Click on the first or last page to see other CFM-A50 service manuals if exist.