Read Sony CFD-V37 Service Manual online
— 8 —
4-3.
TUNER SECTION
•
Switch Location
VOLUME
: MAX
MEGA BASS : OFF
TONE
TONE
: OFF
BAND : AM
Signal generator
Signal generator
BAND : FM
Signal generator
Signal generator
Adjustment Location : MAIN board (Component side)
(See page 9)
0 dB = 1 µV
• Repeat the procedures in each adjustment several times for the
maximum level meter indication.
• The frequency coverage and tracking adjustments should be
finally done by the trimmer capacitors.
AM IF ADJUSTMENT
Adjust for a maximum reading on level meter.
T2
455kHz
AM TRACKING ADJUSTMENT
Adjust for a maximum reading on level meter.
L3
620kHz
CT1 (3/4)
1,400kHz
FM TRACKING ADJUSTMENT
Adjust for a maximum reading on level meter.
L1
87.35MHz(86.5MHz)
CT1 (1/4)
107.8MHz(109.5MHz)
AM SECTION
FM SECTION
Put the lead-wire
antenna close to
the set.
antenna close to
the set.
30% amplitude modulation by 400Hz
signal.
Output level : as low as possible
signal.
Output level : as low as possible
AM RF signal
generator
generator
0.01
µ
F
FM RF signal
generator
generator
telescopic
antenna
input
(ANT1)
antenna
input
(ANT1)
75kHz (100%) amplitude modulation
by 1kHz signal.
Output level : as low as possible
by 1kHz signal.
Output level : as low as possible
32
Ω
set
+
–
level meter
J302 (phones)
AM FREQUENCY COVERAGE ADJUSTMENT
Adjust for a maximum reading on level meter.
L4
516kHz(520kHz)
CT1 (4/4)
1,630kHz(1,780kHz)
FM IF ADJUSTMENT
Adjust for a maximum reading on level meter.
T1
10.7MHz
FM FREQUENCY COVERAGE ADJUSTMENT
Adjust for a maximum reading on level meter.
L2
87.35MHz(86.5MHz)
CT1 (2/4)
107.8MHz(109.5MHz)
( ) : E92 model
Click on the first or last page to see other CFD-V37 service manuals if exist.