CFD-S40CP - Sony Audio Service Manual (repair manual). Page 5

Read Sony CFD-S40CP Service Manual online

5
CFD-S40CP
4
Playing an audio CD or MP3 files
Basic Operations
Connect the supplied AC power cord (see page 23).
1
Press Z PUSH  OPEN/CLOSE  down
to open  the  CD compartment  and
place  the  CD on the CD
compartment.
2
Close the lid of the CD compartment.
3
Press u (N on  the  remote).
The player turns on (direct power-on)
and the player plays all the tracks
once.
To play a disc with MP3 files, see
page 6.
With the label side up
Display
Playing
time
Track
number
1, 2
3
     PUSH
OPEN/CLOSE
     PUSH
OPEN/CLOSE
CD
Basic Operations
5
Use these  buttons  for  additional operations
To
Do this
adjust the volume
Press  VOLUME +, 
(VOL +, —
 on  the  remote).
stop playback
Press x .
pause playback
Press u (X on  the  remote).
Press the button again to
resume play after pause.
go to the next track
Turn the jog dial clockwise.
(On the remote, press >.)
go back  to  the  previous track Turn  the  jog  dial  counterclockwise.
(On the remote,  press 
..)
remove the CD*
Press Z PUSH  OPEN/CLOSE.
turn on/off the player
Press  POWER.
* Once you open the CD compartment, the track to start play will
change  to the beginning  of the first track.
Tip
Playback starts from the
track you last stopped
playing (Resume  play).
During stop,  the track
number to be played are
displayed.
To cancel  the resume play
to start  play from the
beginning of the first track,
press x in stop  mode.
u
POWER
VOLUME +, –
x
Jog dial
Z
 
PUSH
OPEN/CLOSE
continued
6
Playing a disc with MP3 files
1
Press Z PUSH OPEN/CLOSE down to open the CD
compartment  and place  the  CD on the CD compartment
(see page 4) .
2
Close the lid of the CD compartment.
3
Press u (N on  the  remote).
The player turns on and the player plays all files of a disc
(TRACK mode).
When you use a disc with MP3 files, the MP3 indicator
lights up.
Playing a  specific  file (FOLDER mode)
Press FOLDER/TRACK during  stop  to display 
 in the
display, and turn the jog dial to select the folder you want to
play, then press u.
To go to  the  next  track / go back  to the previous
track in  the selected folder
During play
Turn the jog dial.
(Press > or . on  the  remote)
During stop
Press M or m.
(Press TUNE + or - on the remote)
Note
Before playing a file, this
player reads  all file and
folder information  on the
disc. Depending  on the
file structure,  it may  take
more than a minute to
read them. During this
time, TOC READING
is displayed.
Tip
You can use  the buttons
mentioned on page 5 for
additional operations  in
the same way as playing
an audio CD.
Playing an audio CD or MP3  files (continued)
Folder number
Track number
After the  file name  is  displayed,
the playing time will appear
After the  folder name is displayed,
the playing time will appear
u
Mm
Jog dial
Z PUSH
OPEN/CLOSE
FOLDER/TRACK
MP3 indicator
Basic Operations
7
Track mode
Playing all MP3 files from 1, 2, 3...9, 0
Folder mode
Playing all MP3 files in the selected folder.
(Example: If you select folder 3, the player
plays file 4. If you select  folder 4, the  player
plays file 5 and 6.)
CD-R
CD-RW
1
4
2
1
3
5
6
4
7
8
9
5
q;
6
3
2
Example of folder  structure  and  playing
order
The playing order of the folders and files is as follows:
Folder
MP3 file
Notes
¥ A folder  that  does  not
include an MP3 file is
skipped.
¥ Maximum folder number:
255
Maximum file number: 255
¥ Folder names  and file
names can be displayed
with up  to 8 characters.
¥ The characters  A - Z,
0 - 9, and  _ can  be
displayed on this player.
Other characters  are
displayed as  - .
¥ The file name  does  not
correspond to 
the ID 
tag.
Page of 56
Display

Click on the first or last page to see other CFD-S40CP service manuals if exist.