CFD-S36 (serv.man2) - Sony Audio Service Manual (repair manual)

cfd-s36 (serv.man2) service manual
Model
CFD-S36 (serv.man2)
Pages
51
Size
5.37 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
cfd-s36-sm2.pdf
Date

Read Sony CFD-S36 (serv.man2) Service Manual online

1
CD
Model Name Using Similar Mechanism CFD-S22/S32
Section
CD Mechanism Type
KSM-213CDP
Optical Pick-up Name
KSS-213C
TC
Model Name Using Similar Mechanism CFD-V5
Section Tape Transport Mechanism Type
MF-V5-117
SERVICE MANUAL
Canadian Model
E Model
CFD-S36
CD RADIO CASSETTE-CORDER
CD player section
System
Compact disc digital audio system
Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of
about 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.)
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV)
Number of channels
2
Frequency response
20 - 20,000 Hz +1/–2 dB
Wow and flutter
Below measurable limit
Radio section
Frequency range
Except KR model:
    FM: 87.6 - 108 MHz
KR model:
    FM: 87.6 - 107 MHz
CND, E92, MX model:
    AM: 530 - 1,710 kHz
E4, SP, AR, KR model
    AM: 531 - 1,602 kHz (9 kHz step)
    AM: 530 - 1,610 kHz (10 kHz step)
Antennas
FM: Telescopic antenna
AM: Built-in ferrite bar antenna
SPECIFICATIONS
– Continued on next page –
Cassette-corder section
Recording system
4-track 2 channel stereo
Fast winding time
Approx. 120 sec. with Sony cassette C-60
Frequency response
TYPE I (normal): 80 - 10,000 Hz
General
Speaker
Full range: 10 cm dia.,
3.2 ohms, cone type (2)
Outputs
Headphones jack (stereo minijack)
For 16 - 68 ohms impedance headphones
Power output
2.3 W + 2.3 W (at 3.2 ohms, 10 %
harmonic distortion in AC operation)
Power requirements
For CD radio cassette-corder:
CND, E92, MX model:
    120 V AC, 60 Hz
KR model:
    220 V AC, 60 Hz
SP, AR model:
    230 V AC, 50 Hz
E4 model:
    110 - 120 V/220 - 240 V AC selectable, 50/60 Hz
9 V DC, 6 size D (R20) batteries
For remote control
3 V DC, 2 size AA (R6) batteries
Ver 1.3  2002. 06
9-873-061-34
2002F0400-1
© 2002. 06
Sony Corporation
Personal Audio Company
Published by Sony Engineering Corporation
2
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS  IDENTIFIED  BY  MARK  0  OR  DOTTED  LINE
WITH  MARK  
0  ON  THE  SCHEMATIC  DIAGRAMS  AND  IN
THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE  OPERATION.
REPLACE  THESE  COMPONENTS  WITH  SONY  PARTS  WHOSE
PART  NUMBERS  APPEAR  AS  SHOWN  IN  THIS  MANUAL  OR
IN  SUPPLEMENTS  PUBLISHED  BY  SONY.
Power consumption
AC 20 W
Battery life
For CD radio cassette-corder:
FM recording
Sony R20P: approx. 13.5 h
Sony alkaline LR20: approx. 20 h
Tape playback
Sony R20P: approx. 7.5 h
Sony alkaline LR20: approx. 15 h
CD playback
Sony R20P: approx. 2.5 h
Sony alkaline LR20: approx. 7 h
Dimensions
Approx. 420 
× 159 × 284 mm (w/h/d)
(16 
5/8
 
× 6 
3/8
 
× 11 
1/4
 inches) (incl. projecting parts)
Mass
Approx. 3.8 kg (8 lb. 6 oz.) (incl. batteries)
Supplied accessories
AC power cord (1)
Remote control RMT-CS36A (1)
Design and specifications are subject to change without
notice.
• Abbreviation
CND : Canadian model
E92
: AC 120V area in E model
MX
: Mexican model
E4
: AC 110-120V/220-240V area in E model
SP
: Singapore model
AR
: Argentina model
KR
: Korean model
CAUTION
Use of controls or adjustments or performance of proce-
dures other than those specified herein may result in haz-
ardous radiation exposure.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C during
repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Notes on Chip Component Replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK
OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic
breakdown because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic breakdown and also use
the procedure in the printed matter which is included in the repair
parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pick-
up block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
CFD-S36
ATTENTION AU COMPOSANT AYANT RAPPORT
 À LA SÉCURITÉ!!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE  DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
3
TABLE OF CONTENTS
1. SERVICING NOTES
......................................................... 4
2. GENERAL
............................................................................ 5
3. DISASSEMBLY
3-1.   Cabinet (Front) Sub Assy .................................................... 6
3-2.   Wires ................................................................................... 7
3-3.   Power (1) Board, Power (2) Board ...................................... 7
3-4.   Voltage Select Board ........................................................... 8
3-5.   Cabinet (Upper) Assy .......................................................... 8
3-6.   Main Board ......................................................................... 9
3-7.   CD Mechanism Block ......................................................... 9
3-8.   Tape Mechanism Block ..................................................... 10
3-9.   Holder Assy, Cassette ........................................................ 10
3-10. PRE Board ......................................................................... 11
3-11. Belt, M801 (Capstan/Reel Motor),
HRP301 (Head, Magnetic) ................................................ 11
3-12. Optical Pick-up ................................................................. 12
4. MECHANICAL ADJUSTMENTS
............................... 13
5. ELECTRICAL ADJUSTMENTS
Tape Section .......................................................................... 13
Tuner Section ......................................................................... 14
CD Section ............................................................................ 15
6. DIAGRAMS
6-1.   IC Pin Description ............................................................. 16
6-2.   Circuit Boards Location .................................................... 17
6-3.   Block Diagram – CD Section – ......................................... 18
6-4.   Block Diagram – Main Section – ...................................... 19
6-5.   Printed Wiring Board – CD Section – ............................... 20
6-6.   Schematic Diagram – CD Section – .................................. 21
6-7.   Printed Wiring Boards – Main Section – .......................... 22
6-8.   Schematic Diagram – Main Section (1/4) – ...................... 23
6-9.   Schematic Diagram – Main Section (2/4) – ...................... 24
6-10. Schematic Diagram – Main Section (3/4) – ...................... 25
6-11. Schematic Diagram – Main Section (4/4) – ...................... 26
6-12. Printed Wiring Boards – Control Section – ....................... 27
6-13. Schematic Diagrams – Control Section – ......................... 28
6-14. Printed Wiring Boards – Power Supply Section – ............ 29
6-15. Schematic Diagrams – Power Supply Section – ............... 30
7. EXPLODED VIEWS
7-1.   Cabinet (Front) Section ..................................................... 34
7-2.   Cabinet (Rear) Section ...................................................... 35
7-3.   Cabinet (Upper) Section .................................................... 36
7-4.   Tape Mechanism Section-1 ............................................... 38
7-5.   Tape Mechanism Section-2 ............................................... 39
7-6.   Optical Pick-up Section .................................................... 40
8. ELECTRICAL PARTS LIST
......................................... 41
CFD-S36
4
CFD-S36
CHUCK PLATE JIG ON REPAIRING
On repairing CD section, playing a disc without the lid (CD), use
Chuck Plate Jig.
• Code number of Chuck Plate Jig: X-4918-255-1
SECTION 1
SERVICING NOTES
LASER  DIODE  AND  FOCUS  SEARCH  OPERATION
CHECK
1. Turn ON the POWER button and press FUNCTION button to
CD position.
2. Open the lid (CD).
3. Turn on S801 with screwdriver, etc. as following figure.
4. Press the CD  N X  button.
5. Confirm the laser diode emission while observing the objecting
lens. When there is no emission, Auto Power Control circuit or
Optical Pick-up is broken.
Objective lens moves up and down three times for focus search.
S801
Page of 51
Display

Download Sony CFD-S36 (serv.man2) Service Manual (Repair Manual)

Here you can read online and download Sony CFD-S36 (serv.man2) Service Manual in PDF. CFD-S36 (serv.man2) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony CFD-S36 (serv.man2) Audio. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.