Read Sony CFD-S35CP Service Manual online
5
CFD-S35CP
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
4
Playing an audio CD or MP3 files
Connect the supplied mains lead (see page 23).
1
Press CD.
(On the remote, press OPERATE
(POWER, see page 2) and then press
FUNCTION repeatedly until "CD"
appears in the display.)
(POWER, see page 2) and then press
FUNCTION repeatedly until "CD"
appears in the display.)
2
Press Z PUSH OPEN/CLOSE down
to open the CD compartment and
place the CD on the CD
compartment.
to open the CD compartment and
place the CD on the CD
compartment.
3
Close the lid of the CD compartment.
With the label side up
1
4
2, 3
Basic Operations
Basic Operations
5
Display
Playing
time
time
Track
number
number
To
Press
adjust the volume
VOLUME +*, –
(VOL +*, – on the remote.)
(VOL +*, – on the remote.)
stop playback
x
pause playback
u* (X on the remote)
Press the button again to
resume play after pause.
Press the button again to
resume play after pause.
go to the next track
>
go back to the previous track
.
remove the CD
Z PUSH OPEN/CLOSE**
turn on/off the player
OPERATE
(or POWER, see page 2)
(or POWER, see page 2)
* The button has a tactile dot.
**Once you open the CD compartment, the track to start play will
**Once you open the CD compartment, the track to start play will
change to the beginning of the first track.
Tip
Playback starts from the
track you last stopped
playing (Resume play).
During stop, the track
number to be played are
displayed.
To cancel the resume play
to start play from the
beginning of the first track,
press x in stop mode.
track you last stopped
playing (Resume play).
During stop, the track
number to be played are
displayed.
To cancel the resume play
to start play from the
beginning of the first track,
press x in stop mode.
u
OPERATE
(POWER)
(POWER)
VOLUME +, –
x
Z
PUSH
OPEN/CLOSE
continued
4
Press u (N on the remote).
The player plays all the tracks once.
To play a CD with MP3 files, see
page 6.
page 6.
.
,
>
Use these buttons for additional operations
6
Note
Before playing a file, this
player reads all file and
folder information on the
CD. Depending on the file
structure, it may take more
than a minute to read them.
During this time,
“READING” is displayed.
player reads all file and
folder information on the
CD. Depending on the file
structure, it may take more
than a minute to read them.
During this time,
“READING” is displayed.
Tip
You can use the buttons
mentioned in the table on
page 5 for additional
operations in the same way
as when playing an audio
CD.
mentioned in the table on
page 5 for additional
operations in the same way
as when playing an audio
CD.
Playing a CD with MP3 files
1
Press CD.
2
Press Z PUSH OPEN/CLOSE to open the CD
compartment and place the CD on the CD
compartment (see page 4) .
compartment and place the CD on the CD
compartment (see page 4) .
3
Close the lid of the CD compartment.
4
Press u.
The player plays all MP3 files on the CD.
When you play a CD with MP3 files, MP3 indicator
lights up.
The player plays all MP3 files on the CD.
When you play a CD with MP3 files, MP3 indicator
lights up.
To select a folder
Press FLDR + to go forward and FLDR – to go backward .
Press FOLDER +, – on the remote.
Press FOLDER +, – on the remote.
To select a file
Press > to go forward and . to go backward.
Track number
u
.
,
>
CD
After the file name is
displayed, the playing time
will appear
displayed, the playing time
will appear
Z
PUSH
OPEN/CLOSE
Playing an audio CD or MP3 files (continued)
FLDR +, –
MP3 indicator
Basic Operations
7
Example of folder structure and playing
order
order
The playing order of the folders and files is as follows:
Notes
• A folder that does not
include an MP3 file is
skipped.
skipped.
• Maximum number of
folders: 255
Maximum number of files:
255
Maximum number of files:
255
• Folder names and file
names can be displayed
with up to 64 characters.
with up to 64 characters.
• The characters A - Z, a - z,
0 - 9, and _ can be
displayed on this player.
Other characters are
displayed as “*”.
displayed on this player.
Other characters are
displayed as “*”.
• This player conforms to
Version 1.1 of the ID3 tag
format. If the file has the
ID3 tag information, “song
title”, “artist name” and
“album name” can be
displayed.
format. If the file has the
ID3 tag information, “song
title”, “artist name” and
“album name” can be
displayed.
About CD-Rs/CD-RWs and MP3 files
This player can play CD-Rs/CD-RWs recorded in the CD-
DA format* and MP3 files recorded in the CD-ROM
format, but playback capability may vary depending on the
quality of the disc and the condition of the recording
device.
DA format* and MP3 files recorded in the CD-ROM
format, but playback capability may vary depending on the
quality of the disc and the condition of the recording
device.
* CD-DA is the abbreviation for Compact Disc Digital Audio. It is
a recording standard used for Audio CDs.
CD-R
CD-RW
CD-RW
3
2
1
2
4
5
3
6
7
8
4
9
5
0
6
1
Folder
MP3 file
Click on the first or last page to see other CFD-S35CP service manuals if exist.