Read Sony CFD-S03CP / CFD-S03CPL Service Manual online
4
CFD-S03CP/S03CPL
Ref. No.
TYPE A
TYPE B
IC804
S-816A33AMC-BAI-T2-G
NO MOUNT
IC806
NO MOUNT
XC6202P332FR
R883
100k
NO MOUNT
R884
220k
NO MOUNT
SECTION 1
SERVICING NOTES
CHUCK PLATE JIG ON REPAIRING
On repairing CD section, playing a disc without the lid (CD), use
Chuck Plate Jig.
• Code number of Chuck Plate Jig: X-4918-255-1
Chuck Plate Jig.
• Code number of Chuck Plate Jig: X-4918-255-1
LASER DIODE AND FOCUS SEARCH OPERATION
CHECK
CHECK
1. Turn ON the [OPERATE] button and press [CD] button to CD
position.
2. Open the CD lid.
3. Turn on SW2 with screwdriver, etc. as following figure.
4. Press the N X (CD) button.
5. Confirm the laser diode emission while observing the objecting
3. Turn on SW2 with screwdriver, etc. as following figure.
4. Press the N X (CD) button.
5. Confirm the laser diode emission while observing the objecting
lens. When there is no emission, Auto Power Control circuit or
Optical Pick-up is broken.
Objective lens moves up and down three times for focus search.
Optical Pick-up is broken.
Objective lens moves up and down three times for focus search.
SW2
NOTE FOR REPLACEMENT OF THE IC804 AND
IC806
IC806
There have been changes to the 3.3V regulator circuit in the course
of production.
When repairing the 3.3V regulator circuit, check which of TYPE A
or B is applicable as specified in the table below.
of production.
When repairing the 3.3V regulator circuit, check which of TYPE A
or B is applicable as specified in the table below.
Ver. 1.4
Click on the first or last page to see other CFD-S03CP / CFD-S03CPL service manuals if exist.