Read Sony CFD-G550CP Service Manual online
7
CFD-G550CP
12
Connect the supplied AC power cord (see page 23).
1
Press POWER to turn on the player.
2
Press xZ to open the tape
compartment and insert a blank tape.
Use TYPE I (normal) tape only.
Close the compartment.
compartment and insert a blank tape.
Use TYPE I (normal) tape only.
Close the compartment.
3
Select the program source you want
to record.
to record.
To record from the CD player, press
x and load a CD (see page 4).
x and load a CD (see page 4).
To record from the radio, press
RADIO BAND•AUTO PRESET and
tune in the station you want (see page
8).
RADIO BAND•AUTO PRESET and
tune in the station you want (see page
8).
Recording on a tape
3
1
With the side you want to
record on facing upward
record on facing upward
Display
2
4
Basic Operations
13
To
Press
stop recording
xZ
pause recording
X
Press the button again to
resume recording.
resume recording.
turn on/off the player
POWER
4
Press z to start recording
(N is depressed automatically).
(N is depressed automatically).
Use these buttons for additional operations
Tips
• Adjusting the volume or the
• Adjusting the volume or the
audio emphasis (see page
21) will not affect the
recording level.
21) will not affect the
recording level.
• For the best results, use the
AC power as a power
source for recording.
source for recording.
• To erase a recording,
proceed as follows:
1 Insert the tape whose
1 Insert the tape whose
recording you want to
erase.
erase.
2 Press X.
3 Press z. (N
3 Press z. (N
is depressed
automatically.)
4 Press X.
X
POWER
xZ
z
14
The CD Player
Using the display
You can check information about the CD
using the display.
using the display.
DISPLAY
ENTER
MEMORY
ENTER
MEMORY
Total playing time
Total track number
Total track number
Total folder number
t
Checking the information of
an audio CD
an audio CD
To check the total track number
and playing time of the CD
While the CD is stopped, you can check
them in the display.
While the CD is stopped, you can check
them in the display.
To check the remaining time
Press DISPLAY•ENTER•MEMORY while
playing a CD. The display changes as
follows:
Press DISPLAY•ENTER•MEMORY while
playing a CD. The display changes as
follows:
The current track number and playing
time
time
r
The current track number and the
remaining time of the current track
remaining time of the current track
r
The number of tracks left and the time
remaining on the CD
remaining on the CD
t
Checking the information of a
CD with MP3 files
CD with MP3 files
To check the total folder number
and total track number on the
CD
While the CD is stopped, you can check
them in the display.
While the CD is stopped, you can check
them in the display.
To check file information
Press DISPLAY•ENTER•MEMORY while
playing an MP3 file. The display changes as
follows:
Press DISPLAY•ENTER•MEMORY while
playing an MP3 file. The display changes as
follows:
The current track number and playing
time
time
r
The current track number and the file
name
name
r
The folder number and the folder name*
r
The current track number and ID3: the
song title / the artist name / the album
name**
song title / the artist name / the album
name**
* If the folder does not have a folder name,
“ROOT” appears instead of a folder name.
**If the file does not have ID3 information, “NO
TITLE”, “NO ARTIST” or “NO ALBUM”
appears in the display.
appears in the display.
15
The
CD Player
Locating a specific
track
track
You can quickly locate any track on a CD
using the number buttons on the remote.
You can also find a specific point in a track
while playing a CD.
using the number buttons on the remote.
You can also find a specific point in a track
while playing a CD.
To locate
Press
a specific track
the number button of the track
directly
a point while
> (forward) or .
listening to
(backward) while playing and
the sound
hold it until you find the point
a point while
> (forward) or .
observing
(backward) in pause and hold
the display
it until you find the point
., >
Number
buttons
buttons
Notes
• Locating a specific track using the number
• Locating a specific track using the number
buttons is only available for the tracks in the
selected folder.
selected folder.
• You cannot locate a specific track if "SHUF" or
"PGM" is lit in the display. Turn off the
indication by pressing x.
indication by pressing x.
Tips
• When you locate a track numbered over 10,
• When you locate a track numbered over 10,
press >10 first, then the corresponding number
buttons.
Example: To play track number 23, press >10
first, then 2 and 3.
buttons.
Example: To play track number 23, press >10
first, then 2 and 3.
• To select a track numbered over 100 or more,
press >10 twice, then the corresponding number
buttons.
buttons.
Click on the first or last page to see other CFD-G550CP service manuals if exist.