Read Sony CFD-E77L Service Manual online
4
CFD-E77L
SECTION 2
GENERAL
This section is extracted from
instruction manual.
instruction manual.
4
GB
Connect the supplied mains lead (see page 24).
1
Press ZPUSH OPEN/CLOSE down
to open the CD compartment and
place the CD on the CD
compartment.
to open the CD compartment and
place the CD on the CD
compartment.
2
Close the lid of the CD compartment.
3
Press u (N on the remote).
The player turns on (direct power-on)
and plays all the tracks once.
and plays all the tracks once.
Basic Operations
3
Playing a CD
Display
With the label side up
1, 2
PUSH OPEN/CLOSE
PUSH OPEN/CLOSE
Playing time
Track number
Basic Operations
5
GB
Use these buttons for additional operations
OPERATE
x
u
Jog dial
VOLUME +, –
Z
PUSH
OPEN/CLOSE
To
Do this
adjust the volume
Press VOLUME +, – (VOL +, – on
the remote).
the remote).
stop playback
Press x.
pause playback
Press u (X on the remote).
Press the button again to resume
play after pause.
Press the button again to resume
play after pause.
go to the next track
Turn the jog dial clockwise.
(On the remote, press >.)
(On the remote, press >.)
go back to the previous track Turn the jog dial counterclockwise.
(On the remote, press ..)
remove the CD
Press ZPUSH OPEN/CLOSE.
turn on/off the player
Press OPERATE.
6
GB
Listening to the radio
Connect the supplied mains lead (see page 24).
1
Press RADIO BAND•AUTO
PRESET until the band you want
appears in the display (direct power-
on).
PRESET until the band you want
appears in the display (direct power-
on).
Each time you press the button, the
band changes as follows:
band changes as follows:
“FM” t “MW” t “LW”
2
Hold down TUNE + or – until the
frequency digits begin to change in
the display.
frequency digits begin to change in
the display.
The player automatically scans the
radio frequencies and stops when it
finds a clear station.
radio frequencies and stops when it
finds a clear station.
If you can't tune in a station, press
the button repeatedly to change the
frequency step by step.
the button repeatedly to change the
frequency step by step.
Display
Indicates an FM stereo
broadcast
broadcast
1
2
RADIO
AUTO PRESET
BAND
TUNE
Basic Operations
7
GB
Use these buttons for additional operations
To
Press
adjust the volume
VOLUME +, –
(VOL +, – on the remote)
(VOL +, – on the remote)
turn on/off the radio
OPERATE
To improve broadcast reception
Reorient the aerial for FM. Reorient the player itself for
MW/LW.
MW/LW.
for FM
for MW/LW
Tips
• If the FM broadcast is
noisy, press MODE until
“Mono” appears in the
display and the radio will
play in monaural.
“Mono” appears in the
display and the radio will
play in monaural.
• If you need to change the
MW tuning interval,
see page 25.
see page 25.
OPERATE
VOLUME +, –
MODE
Click on the first or last page to see other CFD-E77L service manuals if exist.