Read Sony CFD-D505 / CFS-E14L Service Manual online
MICROFILM
AEP Model
UK Model
SERVICE MANUAL
Model Name Using Similar Mechanism
NEW
Tape Transport Mechanism Type
MF-E14-64G
SPECIFICATIONS
MW: 531 - 1,602 kHz/LW: 153 - 279 kHz/
CFS-E14L
RADIO CASSETTE-CORDER
– 2 –
TABLE OF CONTENTS
1.
GENERAL
...................................................................
2
2.
DISASSEMBLY
.........................................................
3
3.
ADJUSTMENTS
3-1.
Mechanical Adjustments ................................................
5
3-2.
Electrical Adjustments ....................................................
5
4.
DIAGRAMS
4-1.
Printed Wiring Boards ....................................................
9
4-2.
Schematic Diagram ......................................................... 11
5.
EXPLODED VIEWS
................................................ 15
6.
ELECTRICAL PARTS LIST
............................... 19
SECTION 1
GENERAL
This section is extracted from
instruction manual.
HOW TO CHANGE THE CERAMIC FILTERS
This model is used three ceramic filters of CF1, CF3 and CF4.
You must use same type of color marked ceramic filters in order to
meet same specifications.
Therefore, the ceramic filter must change three pieces together since
it's supply three pieces in one package as a spare parts.
You must use same type of color marked ceramic filters in order to
meet same specifications.
Therefore, the ceramic filter must change three pieces together since
it's supply three pieces in one package as a spare parts.
mark1 mark2
center
frequency
red
–
10.70MHz
blue
–
10.67MHz
orange
–
10.73MHz
black
–
10.64MHz
white
–
10.76MHz
white white
10.75MHz
yellow
–
10.79MHz
CF3
CF1, 4
mark 2
mark 1
mark 1
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
!
OR DOTTED
LINE WITH MARK
!
ON THE SCHEMATIC DIAGRAMS
AND IN THE PARTS LIST ARE CRITICAL TO SAFE
OPERATION. REPLACE THESE COMPONENTS WITH
SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB-
LISHED BY SONY.
OPERATION. REPLACE THESE COMPONENTS WITH
SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB-
LISHED BY SONY.
– 3 –
SECTION 2
DISASSEMBLY
Note:
Follow the disassembly procedure in the numerical order given.
CABINET (FRONT) ASS’Y
2
six screws
(P3
(P3
×
30)
1
battery case lid
3
Open the cassette door by
pressing “STOP/EJECT” button.
pressing “STOP/EJECT” button.
5
connector
(CNP4)
(CNP4)
4
cabinet (front) ass’y
– 4 –
TOP PANEL
1
screw (BVTP3
×
12)
6
top panel
2
tone knob
3
volume knob
5
two claws
DIAL POINTER SETTING
Note:
Follow the assembly procedure in the numerical order given.
3
Set the pointer to the position
shown in FIg. -A
shown in FIg. -A
pointer
marking
Fig. -A
PVC drum
4
tuning knob ass’y
5
top panel
2
pointer
4
claw
1
Rotate the PVC drum
fully in the direction
of the arrow.
fully in the direction
of the arrow.
