CFD-CD777SMK2 - Sony Audio Service Manual (repair manual). Page 3

3

The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.

The laser beam on this model is concentrated so as to be focused
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emis-
sion, observe from more than 30 cm away from the objective lens.

1. Set the 

[FUNCTION]

 switch to CD.

2. Open the lid for CD.
3. Turn on S701 as following figure.
4. Press the  NX  button.
5. Confirm the laser diode emission while observing the object-

ing lens.When there is no emission, Auto Power Control cir-
cuit or Optical Pick-up is broken.
Objective lens moves up and down three times for the focus
search.

On repairing CD section, playing a disc without the CD lid, use
Chuck Plate Jig.
• Code number of Chuck Plate Jig: X-4918-255-1

Mark

Center frequency

red

10.70 MHz

blue

10.67 MHz

orange

10.73 MHz

black

10.64 MHz

white

10.76 MHz

This model is used three ceramic filters of CF1, CF2 and CF3.
You must used same type of color marked ceramic filters in order
to meet same specifications.
Therefore, the ceramic filter must changed three pieces together
since it's supply three pieces in one package as a spare parts.